You are Here: Abrasives»Products»652-74-60

Quick Links

Associations
Certifications
FAQs
Bonding Studies
Presentations
Printer Friendly Version     Add This   Increase Text Size   Decrease Text Size

Product: 652-74-60

Product Description:
A 2-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner.


Product Use:
This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.

Adhesive Family
650 High Performance Acrylic Adhesive Adhesive System for LSE bonding
Release Liner
74# White Polycoated Kraft
Carrier/Backing
Not Applicable
Tape Construction
Transfer Tape
Adhesive Liner Side
Acrylic
Adhesive Thickness - Liner Side (Mils)
2.0
Adhesive Exposed Side
Not Applicable
Adhesive Thickness - Exposed Side (Mils)
N/A
Peel Exposed Side
Oz/Inch

Note: Typical Values per PSTC #101 Method E, Backed with 2 Mil Aluminum Foil. 24 Hour Dwell.
Peel Liner Side
55 Oz/Inch

Note: Typical Values per PSTC #101 Method E, Backed with 2 Mil Aluminum Foil. 24 Hour Dwell.
Shear Exposed Side
days

Note: Typical Values per PSTC #107 Procedure A Modified, 1000 grams/Sq.Inch @ 72oF. No Dwell.
Shear Liner Side
7+ days

Note: Typical Values per PSTC #107 Procedure A Modified, 1000 grams/Sq.Inch @ 72oF. No Dwell.
Service Temperature
-30 °F to 375 °F

Note: Data is based on limited testing and under no load.
Roll Weight

Note: Theoretical number only. The actual roll weight may vary.
Tape Thickness (without release liner)

Note: Theoretical number only. Does not include Release Liner. The actual Tape thickness may vary.
SDS Note: If the specific product is not listed in the appendix of the provided "Article Exemption Letter", please contact your sales/account representative for a SDS.


Bonding Study Results

Manufacturer Material DescriptionBonding ResultNotes/Comments
Not Available 1.8# Ether UL after 72 hours @ 150ºF Excellent
Not Available 2# Ester UL after 72 hours @ 150ºF Excellent
Not Available 7# PVC after 72 hours @ 150ºF Good
Armacell Armacell ECF-400 after 72 hours @ 150 ºF Excellent
Armacell Armacell (Ensolite®) MLC – BLACK with heat assist (TS 3909) Excellent
Armacell Armacell (Ensolite®) MBO with heat assist (TS 3909) Excellent
Armacell Armacell (Ensolite®) IUO with heat assist (TS 3909) Excellent
Armacell Armacell (Ensolite®) IUT with heat assist (TS 3909) Very Good to Excellent
Ester after 72 hours @ 150ºF Excellent
Foamex Foamex LP 180-30CP after 72 hours @ 150ºF Excellent
Foamex Foamex Super Seal after 72 hours @ 150ºF Excellent
Foamex Foamex Super Seal after 72 hours @ 150ºF Excellent
Hybrid Foam after 7 days @ RT Excellent
Hydrophobic melamine foam with heat assist (TS 4197) Excellent
Vinyl Nitrile after 72 hours @ 150ºF Excellent
Woodbridge Woodbridge BioFoam after 6 days @ RT (TS 4138) Good
WT Burnett WT Burnett Urethane ECO Foam #L1535RE (TS 4180) Excellent
1.8# Ether UL after 72 hours @ 150ºF Excellent
2# Ester UL after 72 hours @ 150ºF Excellent
7# PVC after 72 hours @ 150ºF Good
Armacell Armacell ECF-400 after 72 hours @ 150 ºF Excellent
Armacell Armacell (Ensolite®) MLC – BLACK with heat assist (TS 3909) Excellent
Armacell Armacell (Ensolite®) MBO with heat assist (TS 3909) Excellent
Armacell Armacell (Ensolite®) IUO with heat assist (TS 3909) Excellent
Armacell Armacell (Ensolite®) IUT with heat assist (TS 3909) Very Good to Excellent
Ester after 72 hours @ 150ºF Excellent
Foamex Foamex LP 180-30CP after 72 hours @ 150ºF Excellent
Foamex Foamex SSW after 24 hrs. with heat assist (TS 4082) Excellent
Foamex Foamex Ether after 72 hours @ 150ºF Excellent
Foamex Foamex ECP270-70 after 24 hrs. without heat assist (TS 4082) Excellent
Foamex Foamex Super Seal after 72 hours @ 150ºF Excellent
Foamex Foamex Neoprene 3 after 48 hrs. without heat assist (TS 4082) Excellent
Foamex Foamex ECP180-30EP after 24 hrs. with heat assist (TS 4082) Very Good
Foamex Foamex ECP150-30EP after 24 hrs. with heat assist (TS 4082) Fair
Foamex Foamex ECP160-50E2 after 24 hrs. with heat assist (TS 4082) Fair to Good
Foamex Foamex ECP160-50E7 after 24 hrs. with heat assist (TS 4082) Fair
Hybrid Foam after 72 hours @ 150ºF Excellent
Vinyl Nitrile after 72 hours @ 150ºF Excellent
Woodbridge Woodbridge “BioFoam”(TS 4138) Fair
Rogers Corporation Poron® Foam 4701-30-15250-04 Excellent Excellent - Complete foam destructive bond and/or substantial force required to remove adhesive from material. With or Without Heat.




Materials Exposed Side
 Materials Liner Side
Not the product you are looking for?. Need to search for something else? Click to run a new search.
Disclaimer: The above information has been provided as a general guidance to assist in preliminary identification of potential products and adhesive systems. Data presented are typical properties taken from a limited number of laboratory tests and should not be used for specification purposes. All products are sold with the understanding that purchasers will be solely responsible for determining the suitability of the materials for any purpose. Berry Global makes no warranties, either express or implied including any implied warranties of merchantability or fitness for use regarding the product information herein.

Berry Global continues to seek ways to assist you in your adhesive selections for a wide variety of materials available on the market. If we can assist you with any further testing or screening to help you select the best Adchem adhesive system or Product for your application please do not hesitate to contact our Technical Service Department or your Sales Representative.