| 1. |
ReduxProducts
- Category: Unknown
- Publish Date: 6/14/2025
|
| 2. |
When it comes to applications for foam, there is one obvious requirement: it needs to stay where you put it. This is why foam adhesive systems are so tremendously important. However, it’s not uncommon for an adhesive system to fail at some point throughout its lifecycle if it hasn’t been properly engineered or specified. Given that this is a known problem with foam adhesives, it begs the question – why not just make a better adhesive system? Well, we wish it were that simple. When creating a...
- Category: Unknown
- Publish Date: 6/15/2023
|
| 3. |
As an engineer or specifier, you face the difficult task of creating an adhesive system that can withstand the numerous challenges your foam application will face throughout its lifecycle. This is no small feat. The adhesive system will be stressed in many different circumstances throughout different points during its lifecycle. This task is further complicated by the fact that a foam adhesive system that works for one application may be ineffective for another with similar specifications. T...
- Category: Unknown
- Publish Date: 6/15/2023
|
| 4. |
- Category: Articles - NEW
- Publish Date: 6/13/2023
|
| 5. |
Product Description: The product is constructed with a high tack, heat resistant rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.9 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: Forms excellent bonds (exposed side of the tape) to a variety of ether, ester and low perm ureth...
- Category: Products Search - NEW
- Publish Date: 9/11/2022
|
| 6. |
Product Description: The product is constructed with a high tack, heat resistant rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.9 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: Forms excellent bonds (exposed side of the tape) to a variety of ether, ester and low perm ureth...
- Category: Products Search - NEW
- Publish Date: 9/11/2022
|
| 7. |
Product Description: The product is constructed with a high tack, heat resistant rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.9 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: Forms excellent bonds (exposed side of the tape) to a variety of ether, ester and low perm ureth...
- Category: Products Search - NEW
- Publish Date: 9/11/2022
|
| 8. |
Product Description: The product is constructed with a high tack, heat resistant rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.9 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: Forms excellent bonds (exposed side of the tape) to a variety of ether, ester and low perm ureth...
- Category: Products Search - NEW
- Publish Date: 9/11/2022
|
| 9. |
Product Description: The product is constructed with a high tack, heat resistant, aggressive rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.3 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: The exposed side of the tape forms excellent bonds to a variety of ether, ester and ...
- Category: Products Search - NEW
- Publish Date: 9/1/2022
|
| 10. |
Product Description: The product is constructed with a high tack, heat resistant, aggressive rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.3 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: The exposed side of the tape forms excellent bonds to a variety of ether, ester and ...
- Category: Products Search - NEW
- Publish Date: 9/1/2022
|
| 11. |
Product Description: The product is constructed with a high tack, heat resistant, aggressive rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.3 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: The exposed side of the tape forms excellent bonds to a variety of ether, ester and ...
- Category: Products Search - NEW
- Publish Date: 8/22/2022
|
| 12. |
Product Description: The product is constructed with a high tack, heat resistant, aggressive rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.3 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: The exposed side of the tape forms excellent bonds to a variety of ether, ester and ...
- Category: Products Search - NEW
- Publish Date: 8/22/2022
|
| 13. |
Product Description: 4148M is a double coated PET film tape. 1.8 mils of high tack, high peel aggressive rubber based adhesive suitable for foam bonding is coated to the exposed (air) side of 1/2 mil polyester film. The 1.4 mil rubber based liner side adhesive exhibits high tack and high adhesion and is designed for general purpose applications. Product Use: Air side rubber based adhesive designed for bonding a wide variety of foams as well as rough and porous substrates. Liner side adhesive suitable fo...
- Category: Products Search - NEW
- Publish Date: 11/16/2020
|
| 14. |
Product Description: 4148M is a double coated PET film tape. 1.8 mils of high tack, high peel aggressive rubber based adhesive suitable for foam bonding is coated to the exposed (air) side of 1/2 mil polyester film. The 1.4 mil rubber based liner side adhesive exhibits high tack and high adhesion and is designed for general purpose applications. Product Use: Air side rubber based adhesive designed for bonding a wide variety of foams as well as rough and porous substrates. Liner side adhesive suitable fo...
- Category: Products Search - NEW
- Publish Date: 11/16/2020
|
| 15. |
Product Description: 4142U is a 2 mil unsupported high tack, high peel aggressive rubber based adhesive system coated on to a release liner. Product Use: A general purpose rubber based tape product designed for bonding a wide variety of polyurethane and polyethylene foams, felts, cork, rubber and sponge materials.
- Category: Products Search - NEW
- Publish Date: 11/16/2020
|
| 16. |
Tape systems designed with a general purpose aggressive rubber-based adhesive that bonds to a wide variety of gasket materials and other substrates including foams. The 4100 series provides an economical bonding solution for a broad range of end-use applications in the industrial, automotive, and appliance/white goods markets. Exhibiting exceptional high peel and excellent QUICK STICK, new 4100 series tapes are available in a variety of construction and release liner options. 4100 Series Sell Sheet
- Category: Tape Systems
- Publish Date: 11/16/2020
|
| 17. |
Product Description: A 3-mil high initial tack, unsupported acrylic permanent pressure sensitive adhesive film, cast on a silicone release liner. Bonds well to a variety of substrates at room temperature. Adheres well to many different types of foam materials. Product Use: For bonding to foams for use in sound dampening. For use in screen print and nameplate applications.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
|
| 18. |
Product Description: A 2 mil high-tack, unsupported acrylic, permanent pressure sensitive Adhesive film cast on a silicone release carrier. Has a broad range of bonding to a variety of substrates at room temperature. Adheres well to many different types of foam materials. Product Use: Bonds well to variety of substrates. For bonding to foams for use in sound dampening. For use in screen print and nameplate applications.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
|
| 19. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays, signs, posters, mirrors, nameplates, and decorative wall products. Especially suited for splicing various types of paper products. Applications where r...
- Category: Products Search - NEW
- Publish Date: 11/14/2020
|
| 20. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays, signs, posters, mirrors, nameplates, and decorative wall products. Especially suited for splicing various types of paper products. Applications where r...
- Category: Products Search - NEW
- Publish Date: 11/14/2020
|
| 21. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 154M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
|
| 22. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays, signs, posters, mirrors, nameplates, and decorative wall products. Especially suited for splicing various types of paper products. Applications where r...
- Category: Products Search - NEW
- Publish Date: 11/14/2020
|
| 23. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 154M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
|
| 24. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 154M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
|
| 25. |
Multi-purpose acrylic system with high tack and moderate shear used for a variety of general purpose bonding applications.
- Category: Tape Systems
- Publish Date: 11/14/2020
|
| 26. |
- Category: Site Map
- Publish Date: 4/14/2020
|
| 27. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 28. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 29. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 30. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 31. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 32. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 33. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 34. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 35. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 36. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 37. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 38. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 39. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 40. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 41. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 42. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 43. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 44. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 45. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 46. |
- Category: Unknown
- Publish Date: 1/6/2020
|
| 47. |
- Category: Unknown
- Publish Date: 11/1/2019
|
| 48. |
Differential Double-Coated PE Foam Tape features a rubber adhesive on the liner side and acrylic adhesive on the air side. Typical Applications include: Electrodes: ECG, EKG, TENS Medical device assembly Medical device attachment
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 49. |
Typical Applications include; Electrodes: ECG, EKG, TENS AED defibrillator pads Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 50. |
High moisture-resistant acrylic adhesive is ideal for long-term wear medical applications including: Electrodes: ECG, EKG, TENS AED defibrillator pads Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 51. |
Typical Applications include; Electrodes: ECG, EKG, TENS AED defibrillator pads Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 52. |
Typical Applications include; Electrodes: ECG, EKG, TENS AED defibrillator pads Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 53. |
Typical Applications include; Electrodes: ECG, EKG, TENS AED defibrillator pads Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 54. |
Typical Applications include; Electrodes: ECG, EKG, TENS AED defibrillator Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 55. |
Typical Applications include; Electrodes: ECG, EKG, TENS Medical device assembly Medical device attachment
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 56. |
Typical Applications include; Electrodes: ECG, EKG, TENS AED defibrillator pads Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 57. |
Typical Applications include: Electrodes (EKG, ECG, TENS) Mounting and laminating electronic components Medical device component Patient monitoring Medical device assembly Sensor components Sensor components Pulse oximetry
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 58. |
Long-term wear acrylic adhesive is ideal for medical applications including: Electrodes: ECG, EKG, TENS AED defibrillator pads Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 59. |
Features a high moisture-resistant acrylic adhesive ideal for long-term wear applications including: Electrodes: ECG, EKG, TENS AED defibrillator pads Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 60. |
Typical Applications include; Electrodes: ECG, EKG, TENS AED defibrillator Medical device mounting Transdermal delivery system
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 61. |
Typical Applications include; Polybag sealing Laminating paper, felt, sponge, rubber, foam and plastic Gasket Assembly Mounting nameplates, decals, and plastic trim
- Category: Products Search - NEW
- Publish Date: 7/22/2019
|
| 62. |
Product Description: 4114U is a 1.4 mil unsupported high tack aggressive rubber based adhesive system coated on to a release liner. Product Use: A general purpose rubber based product designed for bonding a wide variety of foams, felts, cork, rubber and sponge materials. Designed for general industrial applications and materials.
- Category: Products Search - NEW
- Publish Date: 7/5/2019
|
| 63. |
Product Description: 4114U is a 1.4 mil unsupported high tack aggressive rubber based adhesive system coated on to a release liner. Product Use: A general purpose rubber based product designed for bonding a wide variety of foams, felts, cork, rubber and sponge materials. Designed for general industrial applications and materials.
- Category: Products Search - NEW
- Publish Date: 7/5/2019
|
| 64. |
Product Description: 4120U is a 2 mil unsupported high tack aggressive rubber based adhesive system coated on to a release liner. Product Use: A general purpose rubber based product designed for bonding a wide variety of polyurethane and polyethylene foams, felts, cork, rubber and sponge materials.
- Category: Products Search - NEW
- Publish Date: 7/5/2019
|
| 65. |
Product Description: 4132M is a double coated PET film tape. 2.0 mil of high tack, aggressive rubber based adhesive coated to the exposed (air) side of 1/2 mil polyester film. The 1.2 mil rubber based liner side adhesive exhibits high tack and high adhesion and is designed for general purpose applications. Product Use: A general purpose rubber based product designed for bonding a wide variety of polyurethane and polyethylene foams, felts, cork, rubber and sponge materials. A polyester carrier is added f...
- Category: Products Search - NEW
- Publish Date: 7/5/2019
|
| 66. |
- Category: Unknown
- Publish Date: 6/5/2019
|
| 67. |
- Category: Unknown
- Publish Date: 5/19/2019
|
| 68. |
Next generation high performance solvent free, Low VOC acrylic adhesive system. Environmentally friendly and Ideal for most types of adhesive requirements for Automotive and other applications including foam bonding.
- Category: Tape Systems
- Publish Date: 3/20/2019
|
| 69. |
- Category: Site Map
- Publish Date: 3/18/2019
|
| 70. |
- Category: Unknown
- Publish Date: 2/7/2019
|
| 71. |
Product Description: A two sided, high tack, high shear, 8-mils total thickness with an aggressive acrylic adhesive system on a 1-mil PET film and a blue PP liner. Product Use: 488M is the right choice when high tack, higher temperatures and high shear properties are needed. Converter friendly liner allows for precise die cutting and slitting needs. Exceptional performance for wood, metals, rubber and plastic extrusions. Applications: Mounting of rubber parts in the transportation industry Fastening com...
- Category: Products Search - NEW
- Publish Date: 10/15/2018
|
| 72. |
Product Description: A 1/32nd inch thick 6 lb. Density, white closed cell, cross linked closed cell polyethylene foam coated on both sides with the same synthetic rubber adhesive. Available in black as product B181. Product Use: For use in mounting of signs, mirrors, wire clips, moldings, reflectors, molded and extruded plastics, hardware, etc. 6181, 4281, and 4481 have moderate tack and excellent shear and adhesion to most surfaces. All three products are easily die cut. Applications that require a hig...
- Category: Products Search - NEW
- Publish Date: 8/28/2018
|
| 73. |
Product Description: A 1/8th inch thick 4 lb. Density, white closed cell, cross linked polyethylene foam coated on both sides with the same synthetic rubber adhesive. Product Use: GENERAL USE: For use in mounting of signs, mirrors, wire clips, moldings, reflectors, molded and extruded plastics, hardware, etc. 6181, 4281, and 4481 have moderate tack and excellent shear and adhesion to most surfaces. All three products are easily die cut. Applications that require a higher performance double coated foam t...
- Category: Products Search - NEW
- Publish Date: 8/28/2018
|
| 74. |
Product Description: A 1/16th inch thick 6 lb. Density, white closed cell, cross linked closed cell polyethylene foam coated on both sides with the same synthetic rubber adhesive. Available in black as product B281. Product Use: GENERAL USE: For use in mounting of signs, mirrors, wire clips, moldings, reflectors, molded and extruded plastics, hardware, etc. 6181, 4281, and 4481 have moderate tack and excellent shear and adhesion to most surfaces. All three products are easily die cut. Applications that ...
- Category: Products Search - NEW
- Publish Date: 8/28/2018
|
| 75. |
Product Description: 9002 transfer (unsupported) tape is double PET film liner product with coating of 2 mils of high peel, high shear and high temperature resistance silicone adhesive. Product Use: Laminating and bonding to low-surface energy (LSE) materials and silicone foams. Ideal for for use in high temperature and harsh environments.
- Category: Products Search - NEW
- Publish Date: 7/24/2018
|
| 76. |
Product Description: 9500SA is double sided tape with different adhesives coated on a 1mil PET film carrier. The product also has dual release liners. Paper liner on one side and 2 mil PET film liner on the other side. One side (PET liner side) of the PET carrier is coated with a high peel high temperature silicone adhesive. The other side (Paper liner side) is coated with a high performance acrylic adhesive. Product Use: Laminating and bonding to low-surface energy (LSE) materials and sili...
- Category: Products Search - NEW
- Publish Date: 7/24/2018
|
| 77. |
Product Description: 7336A tranfer tape is constructed by coating 1.4 mils of a high peel strength, high tack and moderate shear strength rubber unsupported adhesive to a 74lb PC liner. Product Use: Laminating and bonding to Urethane & Polyethylene foams, felts, fabrics, and rigid plastics. Ideal for temporary hold in place applications. Permanent bonding in low-stress applications. Automotive, graphic arts, HVAC, gasketing and general bonding applications.
- Category: Products Search - NEW
- Publish Date: 7/24/2018
|
| 78. |
Specialty tapes coated with high performance silicone adhesive. Excellent adhesion to low energy surfaces and silicone foams. Also engineered for high temperature resistance requirements (up to 500 Deg F, as seen in the automotive, appliance and other industries. Ideal for for use in harsh environments requiring UV and chemical resistance.
- Category: Tape Systems
- Publish Date: 7/24/2018
|
| 79. |
- Category: Bonding Charts - NEW
- Publish Date: 7/7/2018
|
| 80. |
- Category: Unknown
- Publish Date: 6/25/2018
|
| 81. |
- Category: Unknown
- Publish Date: 6/12/2018
|
| 82. |
Typical Applications include; Laminating paper, felt, sponge rubber, foam, and plastics Mounting nameplates, plastic trim, decals Gasket assembly Weather stripping
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 83. |
Typical Applications include; General purpose laminting for paper, felt, foam and plastic Assembly and fastening of components General purpose splicing applications
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 84. |
Typical Applications include; Laminating paper, felt, sponge rubber, foam, and plastics Mounting nameplates, plastic trim, decals Gasket assembly Weather stripping
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 85. |
Typical Applications include; Gasket assembly Mounting nameplates, decals, and plastic trim Laminating paper, felt, sponge rubber, foam, and plastics
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 86. |
Typical Applications include; Laminating paper, plastic, foam, and metal Removable mounting tape
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 87. |
Typical Applications include; Laminating paper, felt, sponge rubber, foam, and plastic Mounting nameplates, plastic trim, decals Gasket assembly Weather stripping
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 88. |
Typical Applications include; Gasket assembly Mounting nameplates, decals, and decorative plastic trim Laminating paper, felt, sponge rubber, foam and plastic
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 89. |
Typical Applications include; Gasket assembly Mounting nameplates, decals, and decorative plastic trim Laminating paper, felt, sponge rubber, foam and plastic
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 90. |
Typical Applications include; Mounting and assembly applications Laminating to paper, plastic, foam, and metal Packaging applications
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 91. |
Typical Applications include; Laminating paper, felt, sponge rubber, foam, and plastic Component assembly General mounting applications
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 92. |
Typical Applications include; Weather stripping and gasket assembly Removable mounting tape Laminating paper, plastic, foam, and metal Bonding sound and vibration control materials
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 93. |
Typical Applications include; Gasket assembly Mounting nameplates, decals, and decorative plastic trim Laminating paper, felt, sponge rubber, foam and plastic Weather stripping
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 94. |
Typical Applications include; Removable mounting tape Laminating to paper, plastic, foam, and metal Packaging applications
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 95. |
Typical Applications include; General purpose laminating for paper, felt, foam and plastics Assembly and fastening of components General purpose splicing applications
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 96. |
Typical Applications include; Laminating paper, felt, sponge, rubber, foam,and plastic Gasket Assembly Mounting nameplates, decals, and plastic trim
- Category: Products Search - NEW
- Publish Date: 6/5/2018
|
| 97. |
- Category: Unknown
- Publish Date: 3/15/2018
|
| 98. |
Product Description: A high tack, high shear acrylic adhesive film coated 2.0 mils on both sides of a high quality polyester film. Product Use: Developed primarily for Low Surface Energy (LSE) bonding. Typical Applications include; Bonding foam to rigid and flexible plastics Laminating and mounting to many low-surface energy materials Excellent foam bonding properties Low VOC bonding applications Benefits of the high performance LSE Acrylic adhesive: Low fogging, low flammability High tack and shear pro...
- Category: Products Search - NEW
- Publish Date: 2/20/2018
|
| 99. |
Product Description: A thin, conformable, lightweight tissue, coated on both sides with 2 mils of high tack, high shear acrylic based adhesive system. Non-Woven Reinforcement provides stability and conformability Product Use: Developed primarily for Low Surface Energy (LSE) bonding. Typical Applications include; Bonding foam to rigid and flexible plastics Laminating and mounting to many low-surface energy materials Excellent foam bonding properties Low VOC bonding applications Benefits of the hig...
- Category: Products Search - NEW
- Publish Date: 2/20/2018
|
| 100. |
Product Description: A 4-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. Typical Applications include; Bonding foam to rigid and flexible plastics Laminating and mounting to ABS, powder-coated paints, TPO, PE, PP, PET, and many low-surface energy materials Excellent foam bonding properties Low VOC bonding applications Benefits of the hi...
- Category: Products Search - NEW
- Publish Date: 2/20/2018
|
| 101. |
Product Description: A 4-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. Typical Applications include; Bonding foam to rigid and flexible plastics Laminating and mounting to ABS, powder-coated paints, TPO, PE, PP, PET, and many low-surface energy materials Excellent foam bonding properties Low VOC bonding applications Benefits of the hi...
- Category: Products Search - NEW
- Publish Date: 2/20/2018
|
| 102. |
Product Description: 1.6 mils of high tack rubber based adhesive coated to the exposed side of 1/2 mil polyester film. The 1.3 mil rubber based liner side adhesive exhibits high adhesion and is designed for general purpose applications. Product Use: A general purpose rubber based product designed for bonding a wide variety of polyurethane and polyethylene foams, felts and cork. A polyester carrier is added for dimensional stability and to ensure good die cutting properties. Also useful in splicing and g...
- Category: Products Search - NEW
- Publish Date: 2/20/2018
|
| 103. |
Product Description: 1142U is constructed by coating 2.5 mils of a high peel strength, acrylic unsupported adhesive to a 55lb Glassine liner. Featuring a low VOC, environmentally-friendly, solvent-free acrylic adhesive formulation, the 1142U product exhibits high adhesion to medium and low-surface energy materials. Product Use: Laminating and bonding applications to high and low surface energy materials, rough or porous materials such as non-wovens, felts, foams, etc. Ideal for Low VOC applications.
- Category: Products Search - NEW
- Publish Date: 2/20/2018
|
| 104. |
- Category: Unknown
- Publish Date: 10/18/2017
|
| 105. |
- Category: Unknown
- Publish Date: 5/15/2017
|
| 106. |
- Category: Unknown
- Publish Date: 4/28/2017
|
| 107. |
- Category: Unknown
- Publish Date: 4/16/2017
|
| 108. |
- Category: Unknown
- Publish Date: 2/24/2017
|
| 109. |
- Category: Unknown
- Publish Date: 2/24/2017
|
| 110. |
- Category: Unknown
- Publish Date: 2/24/2017
|
| 111. |
- Category: Unknown
- Publish Date: 2/24/2017
|
| 112. |
Product Description: 3.8 mil unsupported permanent acrylic pressure sensitive film cast on a polycoated lay-flat release liner. Product Use: 7744-74 is a high performance unsupported acrylic transfer tape. It is a high tack, high peel and shear product with good heat resistance. It has good chemical and plasticizer resistance as well as excellent long term aging and the ability to withstand environmental extremes. Bonds well to many types of foam. Product Features: • High tack and peel acrylic adhesive ...
- Category: Products Search - NEW
- Publish Date: 9/27/2016
|
| 113. |
Adchem, the adhesive tape engineers, launched a new responsive design website
- Category: Press Releases - NEW
- Publish Date: 8/16/2016
|
| 114. |
- Category: Site Map
- Publish Date: 7/20/2016
|
| 115. |
- Category: Unknown
- Publish Date: 7/8/2016
|
| 116. |
- Category: Unknown
- Publish Date: 7/5/2016
|
| 117. |
- Category: Site Map
- Publish Date: 5/10/2016
|
| 118. |
- Category: Site Map
- Publish Date: 5/10/2016
|
| 119. |
- Category: Site Map
- Publish Date: 5/10/2016
|
| 120. |
Adchem is Gold Sponsor of the 2015 Ward’s Automotive Interiors Show
- Category: Press Releases - NEW
- Publish Date: 4/24/2016
|
| 121. |
- Category: Site Map
- Publish Date: 4/21/2016
|
| 122. |
Product Description: A moderate mass 2.5 mils and 1.5 mils of high tack, modified acrylic adhesive coated on both sides of 1/2 mil polyester film. Exhibits excellent adhesion to vinyl and painted metal surfaces along with good adhesion to sponge rubbers. Product Use: Applications where good resistance to plasticized vinyl extrusions is required.
- Category: Products Search - NEW
- Publish Date: 11/1/2015
|
| 123. |
- Category: Unknown
- Publish Date: 9/17/2015
|
| 124. |
- Category: Unknown
- Publish Date: 3/10/2015
|
| 125. |
- Category: Unknown
- Publish Date: 12/8/2014
|
| 126. |
- Category: Unknown
- Publish Date: 11/13/2014
|
| 127. |
- Category: Site Map
- Publish Date: 8/26/2014
|
| 128. |
Laser Cutting PSA tapes
- Category: Press Releases - NEW
- Publish Date: 8/25/2014
|
| 129. |
- Category: Unknown
- Publish Date: 4/29/2014
|
| 130. |
Product Description: A 4.5-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.
- Category: Products Search - NEW
- Publish Date: 4/21/2014
|
| 131. |
- Category: Unknown
- Publish Date: 3/27/2014
|
| 132. |
Excellent - Complete foam destructive bond and/or substantial force required to remove adhesive from material. With or Without Heat.
- Category: Unknown
- Publish Date: 2/12/2014
|
| 133. |
Adchem has completed its annual automotive certification testing. Using the A2LA accredited facility, Adchem has tested and re-certified numerous double-coated, transfer tape, and foam tape products to specifications from several OEM and Tier One Automotive Suppliers.
- Category: Press Releases - NEW
- Publish Date: 11/18/2013
|
| 134. |
- Category: Unknown
- Publish Date: 8/25/2013
|
| 135. |
- Category: Unknown
- Publish Date: 8/19/2013
|
| 136. |
Product Description: A 3-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.
- Category: Products Search - NEW
- Publish Date: 3/19/2013
|
| 137. |
Product Description: A 2-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.
- Category: Products Search - NEW
- Publish Date: 3/19/2013
|
| 138. |
The study reports on 20 adhesive tapes bonded to Armacell (Monarch®) #8082, a low sulfur, pure EPDM closed cell foam used in highly-sensitive automotive and electronics applications and Armacell (Monarch®) #2003, a high-density neoprene-based technical foam.
- Category: Press Releases - NEW
- Publish Date: 3/10/2013
|
| 139. |
Adchem concentrates on LSE Adhesives at 2013 Ward’s Automotive Interiors Show
- Category: Press Releases - NEW
- Publish Date: 3/10/2013
|
| 140. |
Pressure-Sensitive Adhesive Tapes for bonding to Low Surface Energy (LSE) Materials
- Category: Site Map
- Publish Date: 2/26/2013
|
| 141. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 142. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 143. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 144. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 145. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 146. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 147. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 148. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 149. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 150. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 151. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 152. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 153. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 154. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 155. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 156. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 157. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 158. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 159. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 160. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 161. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 162. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 163. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 164. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 165. |
- Category: Unknown
- Publish Date: 6/1/2012
|
| 166. |
- Category: Site Map
- Publish Date: 5/29/2012
|
| 167. |
- Category: Document Library - NEW
- Publish Date: 5/25/2012
|
| 168. |
- Category: Unknown
- Publish Date: 5/25/2012
|
| 169. |
- Category: Unknown
- Publish Date: 5/25/2012
|
| 170. |
- Category: Unknown
- Publish Date: 5/25/2012
|
| 171. |
- Category: Unknown
- Publish Date: 5/25/2012
|
| 172. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 173. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 174. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 175. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 176. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 177. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 178. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 179. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 180. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 181. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 182. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 183. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 184. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 185. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 186. |
- Category: Unknown
- Publish Date: 5/24/2012
|
| 187. |
- Category: Site Map
- Publish Date: 5/14/2012
|
| 188. |
- Category: Site Map
- Publish Date: 5/14/2012
|
| 189. |
- Category: Site Map
- Publish Date: 5/14/2012
|
| 190. |
- Category: Site Map
- Publish Date: 5/14/2012
|
| 191. |
- Category: Site Map
- Publish Date: 5/4/2012
|
| 192. |
- Category: Site Map
- Publish Date: 5/4/2012
|
| 193. |
All foam materials are laminated using heat-assisted lamination techniques and tested immediately. Results are subjective observations
- Category: Unknown
- Publish Date: 4/24/2012
|
| 194. |
All foam materials are laminated using heat-assisted lamination techniques and tested immediately. Results are subjective observations
- Category: Unknown
- Publish Date: 4/24/2012
|
| 195. |
All foam materials are laminated using heat-assisted lamination techniques and tested immediately. Results are subjective observations
- Category: Unknown
- Publish Date: 4/24/2012
|
| 196. |
All foam materials are laminated using heat-assisted lamination techniques and tested immediately. Results are subjective observations
- Category: Unknown
- Publish Date: 4/24/2012
|
| 197. |
All foam materials are laminated using heat-assisted lamination techniques and tested immediately. Results are subjective observations
- Category: Unknown
- Publish Date: 4/24/2012
|
| 198. |
All foam materials are laminated using heat-assisted lamination techniques and tested immediately. Results are subjective observations
- Category: Unknown
- Publish Date: 4/24/2012
|
| 199. |
- Category: Site Map
- Publish Date: 4/6/2012
|
| 200. |
- Category: Site Map
- Publish Date: 3/23/2012
|
| 201. |
- Category: Site Map
- Publish Date: 3/16/2012
|
| 202. |
A handy conversion and calculation tool, especially for the Pressure Sensitive Adhesive Tape Industry. Includes most of the common conversions and calculations like roll thickness, roll diameter, roll length, square yards per roll, roll pricing etc., for adhesive tapes in roll form.
- Category: Site Map
- Publish Date: 2/10/2012
|
| 203. |
Bonding study involving Sarlink® TPV engineered plastic materials from Teknor Apex
- Category: Press Releases - NEW
- Publish Date: 8/2/2011
|
| 204. |
Bonding study involving engineered plastic materials from Kraiburg TPE
- Category: Press Releases - NEW
- Publish Date: 7/17/2011
|
| 205. |
Foam Bonding Study of New 650 Family of Low Surface Energy Bonding Tapes
- Category: Press Releases - NEW
- Publish Date: 7/12/2011
|
| 206. |
Bonding Study on Extreme TM TPO materials from Spartech Corporation
- Category: Press Releases - NEW
- Publish Date: 6/30/2011
|
| 207. |
Product Description: A 2-mil high performance, unsupported acrylic permanent pressure film, cast on a silicone release liner. 7832 also contains a Biostatic additive which aids in meeting the requirements for a product that is resistant to Microbial growth. Product Use: For bonding to many substrates for high performance applications in numerous industries. Forms excellent bonds to a variety of ether, ester and low perm urethane foams. Engineered for Foam-to-Foam Bonding. Exhibits resistance to many typ...
- Category: Products Search - NEW
- Publish Date: 4/17/2011
|
| 208. |
Next generation high performance acrylic adhesive system for Low Surface Energy (LSE)bonding. Ideal for most types of adhesive requirements for Automotive and other applications including foam bonding.
- Category: Tape Systems
- Publish Date: 4/17/2011
|
| 209. |
Product Description: A 5-mil unsupported rubber based adhesive system coated to a polycoated release liner. Product Use: 6405-12pt-54 is a high performance rubber based transfer adhesive exhibiting high peel strength, excellent initial tack and shear strength. It has excellent bonding characteristics to a wide variety of substrates. GENERAL USE: This product is designed for general purpose bonding especially to foam materials and other low energy surface substrates.
- Category: Products Search - NEW
- Publish Date: 4/17/2011
|
| 210. |
Product Description: A thin, conformable, lightweight tissue, coated on both sides with 2 mils of high tack, high shear acrylic based adhesive system. Product Use: This product was developed for use primarily for LSE bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. The tissue carrier offers easy tear and conformability.
- Category: Products Search - NEW
- Publish Date: 4/17/2011
|
| 211. |
Product Description: A high tack, high shear acrylic adhesive film coated 2.0 mils on both sides of a high quality polyester film. Product Use: This product was developed for use primarily for LSE bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and foams including Urethane.
- Category: Products Search - NEW
- Publish Date: 4/17/2011
|
| 212. |
Product Description: A 3-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.
- Category: Products Search - NEW
- Publish Date: 4/17/2011
|
| 213. |
- Category: Press Releases - NEW
- Publish Date: 10/7/2010
|
| 214. |
- Category: Press Releases - NEW
- Publish Date: 9/19/2010
|
| 215. |
Room for Mushrooms Are you a "fungophobe"? That's what mushroom lovers call people who are afraid to eat mushrooms. True, some wild ones are deadly -- but that's no reason to fear the rich variety of fresh and dried mushrooms popping up in supermarkets. Nutritionally, we should all be fungophiles -- mushroom lovers -- because they're high in fiber, low in calories and free of sodium, fat and cholesterol. The common white cultivated mushroom has lots of potassium; the exotic but often-available shiitake ...
- Category: Unknown
- Publish Date: 8/27/2010
|
| 216. |
Getting a Start on Solid Foods It's every first-time mother's worry as her infant approaches 4 to 6 months of age: When to start solid foods? Experts recommend going slowly and steadily as you help your baby make the transition from breast milk or formula to pureed foods to solids. A baby's introduction to solids should begin after 4 to 6 months and be gradual, says Catherine Dundon, M.D., a pediatrician in Tennessee. One or two tablespoons of rice cereal mixed with breast milk or formula, given twice a...
- Category: Unknown
- Publish Date: 8/27/2010
|
| 217. |
Hair: The Long and Short of It Some hair on your head falls out every day, no matter what your age. And that is perfectly normal. Each hair strand goes through two phases: a growing phase and a resting phase, according to the American Academy of Family Physicians (AAFP). The growing phase lasts two to six years, during which the strand grows about half an inch a month. When the growing phase ends, the hair enters a resting phase of two to three months. After the resting phase, the hair falls out and a n...
- Category: Unknown
- Publish Date: 8/27/2010
|
| 218. |
Pets Fill a Special Role in Seniors' Lives Having a pet can be a boon to body and soul—especially as we age. "Seniors can benefit substantially from pet ownership," says Richard B. Ford, D.V.M., M.S., a veterinarian. Pets offer companionship, something to nurture, unconditional love, and a sense of security in new situations. And pets can relieve stress, which may help explain why studies have found that pet owners have lower blood pressure and cholesterol levels. The nurturing role "Taking care of a cr...
- Category: Unknown
- Publish Date: 8/27/2010
|
| 219. |
It's Time to Veg Out Few of us eat 2-1/2 cups of vegetables per day recommended as part of the U.S. Department of Agriculture's Dietary Guidelines for Americans. Why are vegetables vital? They're good sources of fiber. Fiber makes you feel full and can help control calorie consumption. Vegetables also promote regularity and may play a role in preventing heart disease. They provide vitamins and minerals. This is especially true for the darker-colored, stronger-flavored vegetables. They don't provide fat....
- Category: Unknown
- Publish Date: 8/27/2010
|
| 220. |
Chicken Soup: Good for the Body and the Soul Some foods are good for the body and the soul. Just thinking about homemade chicken soup conjures up all sorts of good memories. Feeling a cold coming on? Make mine chicken soup, please, with some noodles. Feeling well? How about a robust soup, with lots of colorful vegetables, chunks of chicken and big noodles? Is this making you hungry? There's an easy remedy. Cook up a pot of chicken soup yourself. It's easy, inexpensive and offers the added benefits of li...
- Category: Unknown
- Publish Date: 8/27/2010
|
| 221. |
Bed-Wetting: Help Your Child Stay Dry at Night Bed-wetting is a common event in young children. It is normal for a child up to 6 years of age to wet the bed once in a while. As children get older, they can control night urination better. That's because their bladders are larger and more developed. Do not become angry if your child can't stay dry during the night. Never punish or tease your child for bed-wetting. It will only make things worse. Support and patience are the keys in helping your child. Her...
- Category: Unknown
- Publish Date: 8/27/2010
|
| 222. |
Raise the Alarm Against Carbon Monoxide Carbon monoxide (CO), an odorless and colorless gas, is created from the incomplete burning of fuels like gas, oil and wood. CO can come from any device that burns fuel, such as a gas or propane furnace, gas water heater, wood burning fireplace, or a portable butane or gas heater. It can be trapped inside the home by a blocked chimney or flue. Burning charcoal inside a house or running an automobile engine in an attached garage also can produce dangerous CO levels...
- Category: Unknown
- Publish Date: 8/27/2010
|
| 223. |
For Seniors, the Cold Facts Walk into an office when winter sets in and you're bound to hear a cacophony of coughs, sneezes and sniffles. Walk into a school and you're likely to hear even more hacking and nose-blowing. Now, walk into the home of the average senior citizen. Notice how quiet it is? That's because senior citizens are less likely to catch a cold than the rest of us. The reason is largely twofold, doctors say: Most senior citizens don't spend a lot of time with large groups of people especia...
- Category: Unknown
- Publish Date: 8/27/2010
|
| 224. |
Signs and tests The evaluation of an individual with flu symptoms should include a thorough physical exam and, in cases where pneumonia is suspected, a chest x-ray . Additional blood work may be needed. They may include a complete blood count , blood cultures, and sputum cultures. The most common method for diagnosing the flu is an antigen detection test, which is done by swabbing the nose and throat, then sending a sample to the laboratory for testing. The results of these tests can be available rapidl...
- Category: Unknown
- Publish Date: 8/27/2010
|
| 225. |
Low VOC Foam-Bonding Adhesive Tapes for Woodbridge BioFoam ®
- Category: Press Releases - NEW
- Publish Date: 7/25/2010
|
| 226. |
Product Description: An extremely agressive synthetic rubber based adhesive system double coated to a 1/2 mil polyester film. Product Use: This product is designed to adhere to difficult to bond (cured & uncured) rubber surfaces. A heavy masss of adhesive exhibits high peel strength, high tack and high shear strength. This allows 4787M product to adhere to a broad spectrum of surfaces. Especially suitable for extrusion applications in bonding to numerous elastomeric materials inc...
- Category: Products Search - NEW
- Publish Date: 7/19/2010
|
| 227. |
A high tack, high shear modified acrylic adhesive coated on both sides of a polyester film. This Adhesive System has excellent adhesion to vinyl and painted metal surfaces along with good adhesion to sponge rubbers.
- Category: Tape Systems
- Publish Date: 11/22/2009
|
| 228. |
- Category: Press Releases - NEW
- Publish Date: 9/27/2009
|
| 229. |
Product Description: 1.4 mil of high tack rubber based adhesive coated to the exposed side of 1/2 mil polyester film. The 1.3 mil rubber based liner side adhesive exhibits high adhesion and is designed for general purpose applications. Product Use: A general purpose rubber based product designed for bonding a wide variety of polyurethane and polyethylene foams, felts and cork. A polyester carrier is added for dimensional stability and to ensure good die cutting properties. Also useful in splicing and ge...
- Category: Products Search - NEW
- Publish Date: 8/4/2009
|
| 230. |
- Category: Press Releases - NEW
- Publish Date: 8/4/2009
|
| 231. |
Adchem Corporation, a leader in the foam fabrication market for more than 40 years, has released its new Low VOC family of automotive interior adhesive tapes at the Ward's Automotive Interiors Conference in Dearborn, MI.
- Category: Press Releases - NEW
- Publish Date: 6/14/2009
|
| 232. |
Product Description: A 3 mil, high tack, unsupported, acrylic permanent pressure sensitive film cast on a silicone release carrier. Bonds well to variety of substrates at room temperature: films, foams, fabrics, papers or paperboards. Excellent adhesion to skin for medical applications. Product Use: Used in Medical applications to bond to variety of substrates
- Category: Products Search - NEW
- Publish Date: 3/23/2009
|
| 233. |
Product Description: A 2 mil, high tack, unsupported, acrylic permanent pressure sensitive film cast on a silicone release carrier. Bonds well to variety of substrates at room temperature: films, foams, fabrics, papers or paperboards. Excellent adhesion to skin for medical applications. Product Use: Used in Medical applications to bond to variety of substrates
- Category: Products Search - NEW
- Publish Date: 3/23/2009
|
| 234. |
Product Description: The exposed or print side of the 1/2-mil polyester is coated with 1-mil of a high gloss, high tack, moderate peel, moderate shear acrylic adhesive. The liner or glass side is coated with 1-mil of a low peel, removable acrylic based adhesive. Product Use: Used in the medical industry for bonding and laminating to foams, fabrics, and non-wovens where clean removal is required. This allows for clean, easy removability even after 3 months exposure to direct sunlight. .
- Category: Products Search - NEW
- Publish Date: 3/16/2009
|
| 235. |
Product Description: The exposed or print side of the 1/2-mil polyester is coated with 1-mil of a high gloss, high tack, moderate peel, moderate shear acrylic adhesive. The liner or glass side is coated with 1-mil of a low peel, removable acrylic based adhesive. Product Use: Used in the digital imaging and graphic arts industry for permanently bonding to the print while providing an adequate, though removable bond on glass. This allows for clean, easy removability even after 3 months exposure to direct ...
- Category: Products Search - NEW
- Publish Date: 3/15/2009
|
| 236. |
Product Description: A 5 mil unsupported permanent acrylic pressure sensitive film cast on a silicone release liner. Ultra-violet has little or no effect on this film adhesive. Initial tack is low enough to permit some repositionability. This product exhibits high ultimate bond. Product Use: GENERAL USE: Applications were a high coat weight of an acrylic adhesive is needed for bonding metal and plastic nameplates as well as for joining dissimilar materials where long aging, UV and environmental resistan...
- Category: Products Search - NEW
- Publish Date: 2/8/2009
|
| 237. |
The plasticizer tolerant acrylic adhesive system demonstrating moderate tack and peel with excellent long term shear strength. The adhesive system has some short term repositionability to assist in part assembly.
- Category: Tape Systems
- Publish Date: 10/7/2008
|
| 238. |
Product Description: A plasticizer tolerant 3-mil transfer tape on a 2-mil clear polyester film liner. Product Use: Bonding to plasticizer containing material including PVC, vinyl products used in flooring, wall coverings, synthetic leather, banner stock and sheet or roll goods.
- Category: Products Search - NEW
- Publish Date: 10/7/2008
|
| 239. |
- Category: Press Releases - NEW
- Publish Date: 9/23/2008
|
| 240. |
High performance adhesive transfer tapes for bonding to foams used in sound attenuation and Vibration Damping Market.
- Category: Press Releases - NEW
- Publish Date: 9/22/2008
|
| 241. |
Featuring a high performance adhesive transfer tape for bonding to TPO's and other low surface energy materials such as powder-coated metals and polypropylene, 7854 also demonstrates an excellent bond to ether, ester, and low perm urethane foams as well as PVC foams.
- Category: Press Releases - NEW
- Publish Date: 9/22/2008
|
| 242. |
- Category: Media
- Publish Date: 5/14/2008
|
| 243. |
- Category: Media
- Publish Date: 5/14/2008
|
| 244. |
- Category: Media
- Publish Date: 5/14/2008
|
| 245. |
- Category: Media
- Publish Date: 5/14/2008
|
| 246. |
- Category: Media
- Publish Date: 5/14/2008
|
| 247. |
- Category: Media
- Publish Date: 5/14/2008
|
| 248. |
- Category: Media
- Publish Date: 5/14/2008
|
| 249. |
- Category: Media
- Publish Date: 5/14/2008
|
| 250. |
- Category: Media
- Publish Date: 5/14/2008
|