| 1. |
FAQs
- Category: Unknown
- Publish Date: 5/3/2025
- Relevance: 72
|
| 2. |
ReduxFAQs
- Category: Unknown
- Publish Date: 5/3/2025
- Relevance: 57
|
| 3. |
ReduxBrochures
- Category: Unknown
- Publish Date: 5/3/2025
- Relevance: 28
|
| 4. |
ReduxProducts
- Category: Unknown
- Publish Date: 5/3/2025
- Relevance: 20
|
| 5. |
MarketplaceSearch
- Category: Unknown
- Publish Date: 5/3/2025
- Relevance: 13
|
| 6. |
- Category: Unknown
- Publish Date: 5/27/2024
- Relevance: 32
|
| 7. |
When it comes to applications for foam, there is one obvious requirement: it needs to stay where you put it. This is why foam adhesive systems are so tremendously important. However, it’s not uncommon for an adhesive system to fail at some point throughout its lifecycle if it hasn’t been properly engineered or specified. Given that this is a known problem with foam adhesives, it begs the question – why not just make a better adhesive system? Well, we wish it were that simple. When creating a...
- Category: Unknown
- Publish Date: 6/15/2023
- Relevance: 13
|
| 8. |
Product Description: The product is constructed with a high tack, heat resistant rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.9 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: Forms excellent bonds (exposed side of the tape) to a variety of ether, ester and low perm ureth...
- Category: Products Search - NEW
- Publish Date: 9/11/2022
- Relevance: 96
|
| 9. |
Product Description: The product is constructed with a high tack, heat resistant rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.9 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: Forms excellent bonds (exposed side of the tape) to a variety of ether, ester and low perm ureth...
- Category: Products Search - NEW
- Publish Date: 9/11/2022
- Relevance: 96
|
| 10. |
Product Description: The product is constructed with a high tack, heat resistant rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.9 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: Forms excellent bonds (exposed side of the tape) to a variety of ether, ester and low perm ureth...
- Category: Products Search - NEW
- Publish Date: 9/11/2022
- Relevance: 96
|
| 11. |
Product Description: The product is constructed with a high tack, heat resistant rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.9 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: Forms excellent bonds (exposed side of the tape) to a variety of ether, ester and low perm ureth...
- Category: Products Search - NEW
- Publish Date: 9/11/2022
- Relevance: 96
|
| 12. |
Product Description: The product is constructed with a high tack, heat resistant, aggressive rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.3 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: The exposed side of the tape forms excellent bonds to a variety of ether, ester and ...
- Category: Products Search - NEW
- Publish Date: 9/1/2022
- Relevance: 96
|
| 13. |
Product Description: The product is constructed with a high tack, heat resistant, aggressive rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.3 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: The exposed side of the tape forms excellent bonds to a variety of ether, ester and ...
- Category: Products Search - NEW
- Publish Date: 9/1/2022
- Relevance: 96
|
| 14. |
Product Description: The product is constructed with a high tack, heat resistant, aggressive rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.3 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: The exposed side of the tape forms excellent bonds to a variety of ether, ester and ...
- Category: Products Search - NEW
- Publish Date: 8/22/2022
- Relevance: 96
|
| 15. |
Product Description: The product is constructed with a high tack, heat resistant, aggressive rubber adhesive 1.8 mils coated on the liner side along with a high heat resistant acrylic adhesive 1.3 mils coated to the exposed side of a 0.5 mil polyester film. The Exposed side adhesive also contains a biostatic additive, which aids in meeting the requirements for product that are resistant to microbial growth. Product Use: The exposed side of the tape forms excellent bonds to a variety of ether, ester and ...
- Category: Products Search - NEW
- Publish Date: 8/22/2022
- Relevance: 96
|
| 16. |
- Category: Media
- Publish Date: 8/1/2022
- Relevance: 16
|
| 17. |
- Category: Media
- Publish Date: 7/8/2022
- Relevance: 250
|
| 18. |
- Category: Brochures - NEW
- Publish Date: 7/8/2022
- Relevance: 192
|
| 19. |
- Category: Brochures - NEW
- Publish Date: 7/8/2022
- Relevance: 160
|
| 20. |
- Category: Unknown
- Publish Date: 3/25/2022
- Relevance: 32
|
| 21. |
- Category: Certifications - NEW
- Publish Date: 12/3/2021
- Relevance: 224
|
| 22. |
- Category: Certifications - NEW
- Publish Date: 11/19/2021
- Relevance: 53
|
| 23. |
- Category: Site Map
- Publish Date: 12/21/2020
- Relevance: 68
|
| 24. |
Product Description: 4142U is a 2 mil unsupported high tack, high peel aggressive rubber based adhesive system coated on to a release liner. Product Use: A general purpose rubber based tape product designed for bonding a wide variety of polyurethane and polyethylene foams, felts, cork, rubber and sponge materials.
- Category: Products Search - NEW
- Publish Date: 11/16/2020
- Relevance: 10
|
| 25. |
Tape systems designed with a general purpose aggressive rubber-based adhesive that bonds to a wide variety of gasket materials and other substrates including foams. The 4100 series provides an economical bonding solution for a broad range of end-use applications in the industrial, automotive, and appliance/white goods markets. Exhibiting exceptional high peel and excellent QUICK STICK, new 4100 series tapes are available in a variety of construction and release liner options. 4100 Series Sell Sheet
- Category: Tape Systems
- Publish Date: 11/16/2020
- Relevance: 243
|
| 26. |
- Category: Media
- Publish Date: 11/16/2020
- Relevance: 288
|
| 27. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays, signs, posters, mirrors, nameplates, and decorative wall products. Especially suited for splicing various types of paper products. Applications where r...
- Category: Products Search - NEW
- Publish Date: 11/14/2020
- Relevance: 160
|
| 28. |
Product Description: A 2 mil high-tack, unsupported acrylic, permanent pressure sensitive Adhesive film cast on a silicone release carrier. Has a broad range of bonding to a variety of substrates at room temperature. Adheres well to many different types of foam materials. Product Use: Bonds well to variety of substrates. For bonding to foams for use in sound dampening. For use in screen print and nameplate applications.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
- Relevance: 153
|
| 29. |
Product Description: A 3-mil high initial tack, unsupported acrylic permanent pressure sensitive adhesive film, cast on a silicone release liner. Bonds well to a variety of substrates at room temperature. Adheres well to many different types of foam materials. Product Use: For bonding to foams for use in sound dampening. For use in screen print and nameplate applications.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
- Relevance: 153
|
| 30. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 154M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
- Relevance: 144
|
| 31. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays, signs, posters, mirrors, nameplates, and decorative wall products. Especially suited for splicing various types of paper products. Applications where r...
- Category: Products Search - NEW
- Publish Date: 11/14/2020
- Relevance: 144
|
| 32. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays, signs, posters, mirrors, nameplates, and decorative wall products. Especially suited for splicing various types of paper products. Applications where r...
- Category: Products Search - NEW
- Publish Date: 11/14/2020
- Relevance: 144
|
| 33. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 154M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
- Relevance: 144
|
| 34. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 154M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.
- Category: Products Search - NEW
- Publish Date: 11/14/2020
- Relevance: 144
|
| 35. |
Multi-purpose acrylic system with high tack and moderate shear used for a variety of general purpose bonding applications.
- Category: Tape Systems
- Publish Date: 11/14/2020
- Relevance: 96
|
| 36. |
- Category: Articles - NEW
- Publish Date: 10/14/2020
- Relevance: 160
|
| 37. |
- Category: Unknown
- Publish Date: 10/6/2020
- Relevance: 19
|
| 38. |
- Category: Site Map
- Publish Date: 5/19/2020
- Relevance: 172
|
| 39. |
- Category: Brochures - NEW
- Publish Date: 4/23/2020
- Relevance: 192
|
| 40. |
- Category: Brochures - NEW
- Publish Date: 4/23/2020
- Relevance: 192
|
| 41. |
- Category: Site Map
- Publish Date: 4/14/2020
- Relevance: 32
|
| 42. |
- Category: Brochures - NEW
- Publish Date: 4/2/2020
- Relevance: 192
|
| 43. |
- Category: Articles - NEW
- Publish Date: 12/24/2019
- Relevance: 42
|
| 44. |
- Category: Unknown
- Publish Date: 12/10/2019
- Relevance: 24
|
| 45. |
- Category: Unknown
- Publish Date: 8/13/2019
- Relevance: 12
|
| 46. |
Product Description: 4114U is a 1.4 mil unsupported high tack aggressive rubber based adhesive system coated on to a release liner. Product Use: A general purpose rubber based product designed for bonding a wide variety of foams, felts, cork, rubber and sponge materials. Designed for general industrial applications and materials.
- Category: Products Search - NEW
- Publish Date: 7/5/2019
- Relevance: 10
|
| 47. |
Product Description: 4120U is a 2 mil unsupported high tack aggressive rubber based adhesive system coated on to a release liner. Product Use: A general purpose rubber based product designed for bonding a wide variety of polyurethane and polyethylene foams, felts, cork, rubber and sponge materials.
- Category: Products Search - NEW
- Publish Date: 7/5/2019
- Relevance: 10
|
| 48. |
Product Description: 4114U is a 1.4 mil unsupported high tack aggressive rubber based adhesive system coated on to a release liner. Product Use: A general purpose rubber based product designed for bonding a wide variety of foams, felts, cork, rubber and sponge materials. Designed for general industrial applications and materials.
- Category: Products Search - NEW
- Publish Date: 7/5/2019
- Relevance: 10
|
| 49. |
Next generation high performance solvent free, Low VOC acrylic adhesive system. Environmentally friendly and Ideal for most types of adhesive requirements for Automotive and other applications including foam bonding.
- Category: Tape Systems
- Publish Date: 3/20/2019
- Relevance: 96
|
| 50. |
- Category: Site Map
- Publish Date: 3/20/2019
- Relevance: 168
|
| 51. |
- Category: Media
- Publish Date: 3/20/2019
- Relevance: 288
|
| 52. |
- Category: Brochures - NEW
- Publish Date: 11/16/2018
- Relevance: 24
|
| 53. |
- Category: Unknown
- Publish Date: 10/15/2018
- Relevance: 40
|
| 54. |
Product Description: A 1/32nd inch thick 6 lb. Density, white closed cell, cross linked closed cell polyethylene foam coated on both sides with the same synthetic rubber adhesive. Available in black as product B181. Product Use: For use in mounting of signs, mirrors, wire clips, moldings, reflectors, molded and extruded plastics, hardware, etc. 6181, 4281, and 4481 have moderate tack and excellent shear and adhesion to most surfaces. All three products are easily die cut. Applications that require a hig...
- Category: Products Search - NEW
- Publish Date: 8/28/2018
- Relevance: 192
|
| 55. |
Product Description: A 1/8th inch thick 4 lb. Density, white closed cell, cross linked polyethylene foam coated on both sides with the same synthetic rubber adhesive. Product Use: GENERAL USE: For use in mounting of signs, mirrors, wire clips, moldings, reflectors, molded and extruded plastics, hardware, etc. 6181, 4281, and 4481 have moderate tack and excellent shear and adhesion to most surfaces. All three products are easily die cut. Applications that require a higher performance double coated foam t...
- Category: Products Search - NEW
- Publish Date: 8/28/2018
- Relevance: 32
|
| 56. |
Product Description: A 1/16th inch thick 6 lb. Density, white closed cell, cross linked closed cell polyethylene foam coated on both sides with the same synthetic rubber adhesive. Available in black as product B281. Product Use: GENERAL USE: For use in mounting of signs, mirrors, wire clips, moldings, reflectors, molded and extruded plastics, hardware, etc. 6181, 4281, and 4481 have moderate tack and excellent shear and adhesion to most surfaces. All three products are easily die cut. Applications that ...
- Category: Products Search - NEW
- Publish Date: 8/28/2018
- Relevance: 32
|
| 57. |
Product Description: 9002 transfer (unsupported) tape is double PET film liner product with coating of 2 mils of high peel, high shear and high temperature resistance silicone adhesive. Product Use: Laminating and bonding to low-surface energy (LSE) materials and silicone foams. Ideal for for use in high temperature and harsh environments.
- Category: Products Search - NEW
- Publish Date: 7/24/2018
- Relevance: 124
|
| 58. |
Product Description: 9500SA is double sided tape with different adhesives coated on a 1mil PET film carrier. The product also has dual release liners. Paper liner on one side and 2 mil PET film liner on the other side. One side (PET liner side) of the PET carrier is coated with a high peel high temperature silicone adhesive. The other side (Paper liner side) is coated with a high performance acrylic adhesive. Product Use: Laminating and bonding to low-surface energy (LSE) materials and sili...
- Category: Products Search - NEW
- Publish Date: 7/24/2018
- Relevance: 121
|
| 59. |
Product Description: 7336A tranfer tape is constructed by coating 1.4 mils of a high peel strength, high tack and moderate shear strength rubber unsupported adhesive to a 74lb PC liner. Product Use: Laminating and bonding to Urethane & Polyethylene foams, felts, fabrics, and rigid plastics. Ideal for temporary hold in place applications. Permanent bonding in low-stress applications. Automotive, graphic arts, HVAC, gasketing and general bonding applications.
- Category: Products Search - NEW
- Publish Date: 7/24/2018
- Relevance: 9
|
| 60. |
Specialty tapes coated with high performance silicone adhesive. Excellent adhesion to low energy surfaces and silicone foams. Also engineered for high temperature resistance requirements (up to 500 Deg F, as seen in the automotive, appliance and other industries. Ideal for for use in harsh environments requiring UV and chemical resistance.
- Category: Tape Systems
- Publish Date: 7/24/2018
- Relevance: 27
|
| 61. |
Berry Global, Inc. proudly introduces their latest adhesive tape family – the Adchem 1140 series of acrylic transfer tapes. Featuring a low VOC, environmentally-friendly, solvent-free acrylic adhesive formulation.
- Category: Press Releases - NEW
- Publish Date: 4/16/2018
- Relevance: 400
|
| 62. |
- Category: Brochures - NEW
- Publish Date: 3/19/2018
- Relevance: 24
|
| 63. |
- Category: Unknown
- Publish Date: 2/24/2018
- Relevance: 176
|
| 64. |
Product Description: A high tack, high shear acrylic adhesive film coated 2.0 mils on both sides of a high quality polyester film. Product Use: Developed primarily for Low Surface Energy (LSE) bonding. Typical Applications include; Bonding foam to rigid and flexible plastics Laminating and mounting to many low-surface energy materials Excellent foam bonding properties Low VOC bonding applications Benefits of the high performance LSE Acrylic adhesive: Low fogging, low flammability High tack and shear pro...
- Category: Products Search - NEW
- Publish Date: 2/20/2018
- Relevance: 218
|
| 65. |
Product Description: A 4-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. Typical Applications include; Bonding foam to rigid and flexible plastics Laminating and mounting to ABS, powder-coated paints, TPO, PE, PP, PET, and many low-surface energy materials Excellent foam bonding properties Low VOC bonding applications Benefits of the hi...
- Category: Products Search - NEW
- Publish Date: 2/20/2018
- Relevance: 206
|
| 66. |
Product Description: A 4-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. Typical Applications include; Bonding foam to rigid and flexible plastics Laminating and mounting to ABS, powder-coated paints, TPO, PE, PP, PET, and many low-surface energy materials Excellent foam bonding properties Low VOC bonding applications Benefits of the hi...
- Category: Products Search - NEW
- Publish Date: 2/20/2018
- Relevance: 206
|
| 67. |
Product Description: A thin, conformable, lightweight tissue, coated on both sides with 2 mils of high tack, high shear acrylic based adhesive system. Non-Woven Reinforcement provides stability and conformability Product Use: Developed primarily for Low Surface Energy (LSE) bonding. Typical Applications include; Bonding foam to rigid and flexible plastics Laminating and mounting to many low-surface energy materials Excellent foam bonding properties Low VOC bonding applications Benefits of the hig...
- Category: Products Search - NEW
- Publish Date: 2/20/2018
- Relevance: 206
|
| 68. |
Product Description: 1142U is constructed by coating 2.5 mils of a high peel strength, acrylic unsupported adhesive to a 55lb Glassine liner. Featuring a low VOC, environmentally-friendly, solvent-free acrylic adhesive formulation, the 1142U product exhibits high adhesion to medium and low-surface energy materials. Product Use: Laminating and bonding applications to high and low surface energy materials, rough or porous materials such as non-wovens, felts, foams, etc. Ideal for Low VOC applications.
- Category: Products Search - NEW
- Publish Date: 2/20/2018
- Relevance: 137
|
| 69. |
- Category: Unknown
- Publish Date: 11/30/2017
- Relevance: 24
|
| 70. |
- Category: Unknown
- Publish Date: 10/18/2017
- Relevance: 32
|
| 71. |
- Category: Unknown
- Publish Date: 4/16/2017
- Relevance: 24
|
| 72. |
- Category: Bonding Charts - NEW
- Publish Date: 4/3/2017
- Relevance: 204
|
| 73. |
- Category: Site Map
- Publish Date: 3/28/2017
- Relevance: 13
|
| 74. |
- Category: Unknown
- Publish Date: 2/24/2017
- Relevance: 202
|
| 75. |
- Category: Unknown
- Publish Date: 2/24/2017
- Relevance: 160
|
| 76. |
- Category: Unknown
- Publish Date: 2/24/2017
- Relevance: 160
|
| 77. |
- Category: Unknown
- Publish Date: 2/10/2017
- Relevance: 19
|
| 78. |
Product Description: 3.8 mil unsupported permanent acrylic pressure sensitive film cast on a polycoated lay-flat release liner. Product Use: 7744-74 is a high performance unsupported acrylic transfer tape. It is a high tack, high peel and shear product with good heat resistance. It has good chemical and plasticizer resistance as well as excellent long term aging and the ability to withstand environmental extremes. Bonds well to many types of foam. Product Features: • High tack and peel acrylic adhesive ...
- Category: Products Search - NEW
- Publish Date: 9/27/2016
- Relevance: 11
|
| 79. |
Glazing Pressure Sensitive Adhesives - Best practice for Vinyl windows
- Category: Presentations - NEW
- Publish Date: 9/13/2016
- Relevance: 32
|
| 80. |
- Category: Articles - NEW
- Publish Date: 9/13/2016
- Relevance: 32
|
| 81. |
Adchem, the adhesive tape engineers, launched a new responsive design website
- Category: Press Releases - NEW
- Publish Date: 8/16/2016
- Relevance: 64
|
| 82. |
- Category: Site Map
- Publish Date: 7/20/2016
- Relevance: 60
|
| 83. |
- Category: Unknown
- Publish Date: 7/8/2016
- Relevance: 216
|
| 84. |
- Category: Site Map
- Publish Date: 5/16/2016
- Relevance: 19
|
| 85. |
- Category: Site Map
- Publish Date: 5/10/2016
- Relevance: 19
|
| 86. |
Adchem is Gold Sponsor of the 2015 Ward’s Automotive Interiors Show
- Category: Press Releases - NEW
- Publish Date: 4/24/2016
- Relevance: 64
|
| 87. |
- Category: Site Map
- Publish Date: 4/21/2016
- Relevance: 211
|
| 88. |
- Category: Site Map
- Publish Date: 4/19/2016
- Relevance: 202
|
| 89. |
- Category: Unknown
- Publish Date: 10/29/2015
- Relevance: 32
|
| 90. |
- Category: Unknown
- Publish Date: 12/17/2014
- Relevance: 160
|
| 91. |
- Category: Unknown
- Publish Date: 12/17/2014
- Relevance: 160
|
| 92. |
- Category: Unknown
- Publish Date: 12/17/2014
- Relevance: 160
|
| 93. |
- Category: Site Map
- Publish Date: 8/26/2014
- Relevance: 288
|
| 94. |
- Category: Articles - NEW
- Publish Date: 8/25/2014
- Relevance: 200
|
| 95. |
Laser Cutting PSA tapes
- Category: Press Releases - NEW
- Publish Date: 8/25/2014
- Relevance: 96
|
| 96. |
Product Description: A 4.5-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.
- Category: Products Search - NEW
- Publish Date: 4/21/2014
- Relevance: 224
|
| 97. |
- Category: Site Map
- Publish Date: 1/2/2014
- Relevance: 11
|
| 98. |
Adchem has completed its annual automotive certification testing. Using the A2LA accredited facility, Adchem has tested and re-certified numerous double-coated, transfer tape, and foam tape products to specifications from several OEM and Tier One Automotive Suppliers.
- Category: Press Releases - NEW
- Publish Date: 11/18/2013
- Relevance: 72
|
| 99. |
- Category: Unknown
- Publish Date: 7/23/2013
- Relevance: 24
|
| 100. |
The study reports on bonding Adchem adhesive tapes to BRP products Buna “N”, Neoprene, VITON® rubber sheet, EPDM Nylon inserted Neoprene products at varying durometer levels..
- Category: Press Releases - NEW
- Publish Date: 6/24/2013
- Relevance: 54
|
| 101. |
Adchem has been certified to Responsible Tape Manufacturer Program of the Pressure Sensitive Tape Council (PSTC RTM Program)
- Category: Site Map
- Publish Date: 5/2/2013
- Relevance: 19
|
| 102. |
- Category: Media
- Publish Date: 3/20/2013
- Relevance: 42
|
| 103. |
- Category: Media
- Publish Date: 3/20/2013
- Relevance: 42
|
| 104. |
- Category: Media
- Publish Date: 3/20/2013
- Relevance: 42
|
| 105. |
- Category: Media
- Publish Date: 3/20/2013
- Relevance: 42
|
| 106. |
Product Description: A 2-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.
- Category: Products Search - NEW
- Publish Date: 3/19/2013
- Relevance: 224
|
| 107. |
Product Description: A 3-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.
- Category: Products Search - NEW
- Publish Date: 3/19/2013
- Relevance: 224
|
| 108. |
650 Family of Adhesive Tapes for Low Surface Energy (LSE) Bonding
- Category: Presentations - NEW
- Publish Date: 3/14/2013
- Relevance: 330
|
| 109. |
Adchem concentrates on LSE Adhesives at 2013 Ward’s Automotive Interiors Show
- Category: Press Releases - NEW
- Publish Date: 3/10/2013
- Relevance: 266
|
| 110. |
The study reports on 20 adhesive tapes bonded to Armacell (Monarch®) #8082, a low sulfur, pure EPDM closed cell foam used in highly-sensitive automotive and electronics applications and Armacell (Monarch®) #2003, a high-density neoprene-based technical foam.
- Category: Press Releases - NEW
- Publish Date: 3/10/2013
- Relevance: 82
|
| 111. |
Pressure-Sensitive Adhesive Tapes for bonding to Low Surface Energy (LSE) Materials
- Category: Site Map
- Publish Date: 2/26/2013
- Relevance: 334
|
| 112. |
Adchem Corporation, announced its certification under the newly established Responsible Tape Manufacturer (RTM) program of the Pressure Sensitive Tape Council (PSTC)
- Category: Press Releases - NEW
- Publish Date: 1/3/2013
- Relevance: 76
|
| 113. |
Adchem Corporation has engineered a new family of acrylic tape products to bond to Low Surface Energy (LSE) materials increasingly used in the automotive, electronics, and transportation markets.
- Category: Press Releases - NEW
- Publish Date: 12/19/2012
- Relevance: 309
|
| 114. |
- Category: Site Map
- Publish Date: 7/25/2012
- Relevance: 24
|
| 115. |
- Category: Site Map
- Publish Date: 7/18/2012
- Relevance: 19
|
| 116. |
- Category: Site Map
- Publish Date: 6/12/2012
- Relevance: 20
|
| 117. |
- Category: Site Map
- Publish Date: 5/29/2012
- Relevance: 19
|
| 118. |
- Category: Site Map
- Publish Date: 5/14/2012
- Relevance: 8
|
| 119. |
- Category: Site Map
- Publish Date: 5/14/2012
- Relevance: 5
|
| 120. |
- Category: Site Map
- Publish Date: 5/14/2012
- Relevance: 19
|
| 121. |
- Category: Site Map
- Publish Date: 5/14/2012
- Relevance: 34
|
| 122. |
- Category: Site Map
- Publish Date: 5/14/2012
- Relevance: 32
|
| 123. |
- Category: Site Map
- Publish Date: 5/14/2012
- Relevance: 18
|
| 124. |
- Category: Site Map
- Publish Date: 5/4/2012
- Relevance: 14
|
| 125. |
- Category: Site Map
- Publish Date: 5/4/2012
- Relevance: 4
|
| 126. |
- Category: Site Map
- Publish Date: 5/4/2012
- Relevance: 4
|
| 127. |
Bonding studies of Adchem pressure-sensitive adhesives against various substrates, materials like Foams,Metals,Rubbers,Plastics,LSE etc., presented in a user friendly format as bonding charts. These charts help in viewing and selecting the appropriate Adchem adhesive tape product based upon the substrate/material.
- Category: Site Map
- Publish Date: 4/13/2012
- Relevance: 51
|
| 128. |
- Category: Site Map
- Publish Date: 4/6/2012
- Relevance: 21
|
| 129. |
- Category: Site Map
- Publish Date: 3/23/2012
- Relevance: 4
|
| 130. |
- Category: Site Map
- Publish Date: 3/23/2012
- Relevance: 4
|
| 131. |
- Category: Site Map
- Publish Date: 3/23/2012
- Relevance: 14
|
| 132. |
- Category: Site Map
- Publish Date: 3/23/2012
- Relevance: 12
|
| 133. |
- Category: Site Map
- Publish Date: 3/23/2012
- Relevance: 13
|
| 134. |
- Category: Site Map
- Publish Date: 3/23/2012
- Relevance: 7
|
| 135. |
- Category: Site Map
- Publish Date: 3/23/2012
- Relevance: 7
|
| 136. |
- Category: Site Map
- Publish Date: 3/16/2012
- Relevance: 162
|
| 137. |
A handy conversion and calculation tool, especially for the Pressure Sensitive Adhesive Tape Industry. Includes most of the common conversions and calculations like roll thickness, roll diameter, roll length, square yards per roll, roll pricing etc., for adhesive tapes in roll form.
- Category: Site Map
- Publish Date: 2/10/2012
- Relevance: 8
|
| 138. |
Bonding study involving Rubber and Elastomeric Materials from American Biltrite
- Category: Press Releases - NEW
- Publish Date: 9/14/2011
- Relevance: 192
|
| 139. |
- Category: Articles - NEW
- Publish Date: 8/31/2011
- Relevance: 32
|
| 140. |
Bonding study involving Sarlink® TPV engineered plastic materials from Teknor Apex
- Category: Press Releases - NEW
- Publish Date: 8/2/2011
- Relevance: 192
|
| 141. |
Bonding study involving engineered plastic materials from Kraiburg TPE
- Category: Press Releases - NEW
- Publish Date: 7/17/2011
- Relevance: 192
|
| 142. |
Foam Bonding Study of New 650 Family of Low Surface Energy Bonding Tapes
- Category: Press Releases - NEW
- Publish Date: 7/12/2011
- Relevance: 234
|
| 143. |
Bonding Study on Extreme TM TPO materials from Spartech Corporation
- Category: Press Releases - NEW
- Publish Date: 6/30/2011
- Relevance: 192
|
| 144. |
Next generation high performance acrylic adhesive system for Low Surface Energy (LSE)bonding. Ideal for most types of adhesive requirements for Automotive and other applications including foam bonding.
- Category: Tape Systems
- Publish Date: 4/17/2011
- Relevance: 320
|
| 145. |
Product Description: A thin, conformable, lightweight tissue, coated on both sides with 2 mils of high tack, high shear acrylic based adhesive system. Product Use: This product was developed for use primarily for LSE bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. The tissue carrier offers easy tear and conformability.
- Category: Products Search - NEW
- Publish Date: 4/17/2011
- Relevance: 224
|
| 146. |
Product Description: A high tack, high shear acrylic adhesive film coated 2.0 mils on both sides of a high quality polyester film. Product Use: This product was developed for use primarily for LSE bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and foams including Urethane.
- Category: Products Search - NEW
- Publish Date: 4/17/2011
- Relevance: 224
|
| 147. |
Product Description: A 3-mil high initial tack, unsupported acrylic permanent pressure-sensitive film, cast on a silicone-sensitive release liner. Product Use: This product was developed for use primarily for Low Surface Energy (LSE) bonding. The high performance Acrylic Adhesive provides bonding to a wide variety of LSE materials and many types of foams including Urethane. Exhibits excellent peel and shear properties.
- Category: Products Search - NEW
- Publish Date: 4/17/2011
- Relevance: 224
|
| 148. |
Product Description: A 5-mil unsupported rubber based adhesive system coated to a polycoated release liner. Product Use: 6405-12pt-54 is a high performance rubber based transfer adhesive exhibiting high peel strength, excellent initial tack and shear strength. It has excellent bonding characteristics to a wide variety of substrates. GENERAL USE: This product is designed for general purpose bonding especially to foam materials and other low energy surface substrates.
- Category: Products Search - NEW
- Publish Date: 4/17/2011
- Relevance: 153
|
| 149. |
Product Description: A 2-mil high performance, unsupported acrylic permanent pressure film, cast on a silicone release liner. 7832 also contains a Biostatic additive which aids in meeting the requirements for a product that is resistant to Microbial growth. Product Use: For bonding to many substrates for high performance applications in numerous industries. Forms excellent bonds to a variety of ether, ester and low perm urethane foams. Engineered for Foam-to-Foam Bonding. Exhibits resistance to many typ...
- Category: Products Search - NEW
- Publish Date: 4/17/2011
- Relevance: 108
|
| 150. |
- Category: Press Releases - NEW
- Publish Date: 10/7/2010
- Relevance: 72
|
| 151. |
- Category: Press Releases - NEW
- Publish Date: 9/19/2010
- Relevance: 64
|
| 152. |
When a Reward for Kids Becomes a Bribe A 5-year-old never puts away her toys without a shouting match with her parents. Mom promises a trip to Disney World if the girl will routinely clean up after herself without an argument. Reward, or bribe? A 12-year-old hates homework and routinely skips it. Dad pledges to spend Saturday morning alone with his son doing whatever the boy wants if he'll complete his homework without a reminder for a week. Reward, or bribe? Bribe on the first count, but a positive rew...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 28
|
| 153. |
Why the Doctor Asks for a Urine Sample It's probably safe to say that no one really relishes giving a urine sample. But the truth is that few tests can match the routine urine analysis for telling your physician about what's going on inside your body. The bladder can hold almost 2 cups of urine for 2 to 5 hours comfortably, and excretes 2 quarts of waste products and additional water daily. And just as you use a dipstick to check your car's engine oil, physicians rely on a specially treated "dipstick," ...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 43
|
| 154. |
Legs Aid Heart in Pumping Blood Your heart has the gargantuan task of pushing blood through 60,000 miles of blood vessels. Still, it may come as a surprise to learn that your heart doesn't do the job alone. It gets an important assist from your body's other muscles, especially those in the legs, which play an important role. Your body has two basic types of blood vessels. Arteries are thick-walled vessels that carry oxygenated blood to your muscles and organs under pressure supplied by the heart, a fist...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 24
|
| 155. |
Five Steps to Better Memory You've met her before. You can even remember where. But her name? It eludes you, taunting you, just out of reach. Has this happened to you? Do you accept it as part of growing older? Ironically, new research shows this attitude may make things worse. When older adults were told they couldn't control their memory during a University of Florida study, they lost confidence and made little effort to remember a series of names. In contrast, older adults who had been told they coul...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 30
|
| 156. |
Signs and tests Allergy testing may be helpful in identifying allergens in people with persistent asthma. Common allergens include pet dander, dust mites, cockroach allergens, molds, and pollens. Common respiratory irritants include tobacco smoke, pollution, and fumes from burning wood or gas. The doctor will use a stethoscope to listen to the lungs. Asthma-related sounds may be heard. However, lung sounds are usually normal between asthma episodes. Tests may include: Arterial blood gas Blood tests to m...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 96
|
| 157. |
Signs and tests Your doctor may note decreased or absent breath sounds on the affected side. Signs of hemothorax may be seen on the following tests: Chest x-ray CT scan Pleural fluid analysis Thoracentesis Support Groups Expectations (prognosis) The outcome depends on the cause of the hemothorax and how quickly treatment is given. Calling your health care provider Call 911 if you have: Any serious injury to the chest Chest pain or shortness of breath Go to the emergency room or call the local emergency ...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 30
|
| 158. |
Signs and tests The health care provider may note decreased breath sounds or a friction rub when listening to the chest with a stethoscope ( auscultation ). Tests may include the following: Chest x-ray CT scan of chest Pleural fluid gram stain and culture Thoracentesis Support Groups Expectations (prognosis) When empyema complicates pneumonia, the risk of permanent lung damage and death goes up. Patients will need long-term treatment with antibiotics and drainage. However, most people fully recover from...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 30
|
| 159. |
Signs and tests There are decreased or no breath sounds on the affected side when heard through a stethoscope. Tests include: Chest x-ray to tell whether there is air outside the lung Arterial blood gases Support Groups Expectations (prognosis) If you have a collapsed lung, you are more likely to have another one in the future if you: Are tall and thin Continue to smoke Have had two collapsed lungs in the past How well a person does after having a collapsed lung depends on what caused it. Calling your h...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 56
|
| 160. |
Signs and tests A blood test is available to help detect CF. The test looks for variations in a gene known to cause the disease. Other tests use to diagnose CF include: Immunoreactive trypsinogen (IRT) test is a standard newborn screening test for CF. A high level of IRT suggests possible CF and requires further testing. Sweat chloride test is the standard diagnostic test for CF. A high salt level in the patient's sweat is a sign of the disease. Other tests that identify problems that can be related to ...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 24
|
| 161. |
First Aid DO NOT perform these steps if the infant is coughing forcefully or has a strong cry -- either of which can dislodge the object on its own. Lay the infant face down, along your forearm. Use your thigh or lap for support. Hold the infant's chest in your hand and jaw with your fingers. Point the infant's head downward, lower than the body. Give up to 5 quick, forceful blows between the infant's shoulder blades. Use the heel of your free hand. IF THE OBJECT ISN'T FREE AFTER 5 BLOWS Turn the infant...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 56
|
| 162. |
First Aid Reassure the victim and try to keep them calm. As first aid is administered, be sensitive to the victim's privacy -- shield the injured area. To control bleeding, use direct pressure. Place a clean cloth or sterile dressing on any open wounds. If the vagina is bleeding severely, pack the area with sterile gauze or clean cloths unless a foreign body is suspected. Apply cold compresses to help reduce swelling. If the testicles have been injured, support them with a sling made from towels and app...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 36
|
| 163. |
First Aid 1. Care for all wounds first before applying a splint. 2. An injured body part should usually be splinted in the position in which it was found. 3. Find something rigid to use as supports to make the splint such as sticks, boards, or even rolled up newspapers. If none can be found, use a rolled blanket or clothing. An injured body part can also be taped to an uninjured body part in order to prevent it from moving. For example, you can tape an injured finger to the finger next to it to keep it ...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 30
|
| 164. |
First Aid Apply ice immediately to help reduce swelling. Wrap the ice in cloth -- DO NOT place ice directly on the skin. Try NOT to move the affected area. To help you do this, bandage the affected area firmly, but not tightly. ACE bandages work well. Use a splint if necessary. Keep the swollen joint elevated above the level of the heart, even while sleeping. Rest the affected joint for several days. Aspirin, ibuprofen, or other pain relievers can help. DO NOT give aspirin to children. Keep pressure off...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 30
|
| 165. |
First Aid How to perform the Heimlich maneuver: First ask, "Are you choking? Can you speak?" DO NOT perform first aid if the person is coughing forcefully and able to speak -- a strong cough can dislodge the object. Stand behind the person and wrap your arms around the person's waist. Make a fist with one hand. Place the thumb side of your fist just above the person's navel, well below the breastbone. Grasp the fist with your other hand. Make quick, upward and inward thrusts with your fist. Continue the...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 28
|
| 166. |
First Aid Follow the steps below, depending on the type of ear emergency. OBJECT IN THE EAR Calm and reassure the person. If the object is sticking out and easy to remove, gently remove it by hand or with tweezers. Then, get medical help to make sure the entire object was removed. If you think a small object may be lodged within the ear, but you cannot see it, DO NOT reach inside the ear canal with tweezers. You can do more harm than good. Try using gravity to get the object out by tilting the head to t...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 25
|
| 167. |
First Aid 1. Keep the person calm, reassuring them that bites can be effectively treated in an emergency room. Restrict movement, and keep the affected area below heart level to reduce the flow of venom. 2. If you have a pump suction device (such as that made by Sawyer), follow the manufacturer's directions. 3. Remove any rings or constricting items because the affected area may swell. Create a loose splint to help restrict movement of the area. 4. If the area of the bite begins to swell and change colo...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 51
|
| 168. |
First Aid When a seizure occurs, the main goal is to protect the person from injury. Try to prevent a fall. Lay the person on the ground in a safe area. Clear the area of furniture or other sharp objects. Cushion the person's head. Loosen tight clothing, especially around the person's neck. Turn the person on his or her side. If vomiting occurs, this helps make sure that the vomit is not inhaled into the lungs. Look for a medical I.D. bracelet with seizure instructions. Stay with the person until he or ...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 28
|
| 169. |
First Aid Only provide medical care if you have the appropriate protective gear to prevent contaminating yourself: Check the person's breathing and pulse. Start CPR , if necessary. Have the person's remove their clothing and place the items in a sealed container. This stops ongoing contamination. Vigorously wash body with soap and water. Dry the body and wrap with soft, clean blanket. Call for emergency medical help and take the person to nearest emergency medical facility. REPORT EXPOSURE TO EMERGENCY ...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 28
|
| 170. |
First Aid Calm and reassure the person. Wear latex gloves or wash your hands thoroughly before attending to the wound. Wash hands afterwards, too. If the bite is not bleeding severely, wash the wound thoroughly with mild soap and running water for 3 to 5 minutes. Then, cover the bite with antibiotic ointment and a clean dressing. If the bite is actively bleeding, apply direct pressure with a clean, dry cloth until the bleeding stops. Raise the area of the bite. If the bite is on the hand or fingers, cal...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 28
|
| 171. |
First Aid Call or tell someone to call 911 . Check the person's airway, breathing, and pulse frequently. If necessary, begin rescue breathing and CPR . If the person is breathing and lying on the back, and you do not think there is a spinal injury , carefully roll the person toward you onto the side. Bend the top leg so both hip and knee are at right angles. Gently tilt the head back to keep the airway open. If breathing or pulse stops at any time, roll the person on to his back and begin CPR. If you th...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 28
|
| 172. |
First Aid The main goal is to keep the person immobile and safe until medical help arrives. You or someone else should call 911. Hold the person's head and neck in the position in which they were found. DO NOT attempt to reposition the neck. Do not allow the neck to bend or twist. Do not allow the person to get up and walk unassisted. IF THE PERSON IS UNRESPONSIVE Check the person's breathing and circulation. If necessary, begin rescue breathing and CPR . DO NOT tilt the head back when attempting to ope...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 28
|
| 173. |
First Aid FOR MINOR BURNS If the skin is unbroken, run cool water over the area of the burn or soak it in a cool water bath (not ice water). Keep the area submerged for at least 5 minutes. A clean, cold, wet towel will also help reduce pain. Calm and reassure the person. After flushing or soaking, cover the burn with a dry, sterile bandage or clean dressing. Protect the burn from pressure and friction. Over-the-counter ibuprofen or acetaminophen can help relieve pain and swelling. Do NOT give children u...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 24
|
| 174. |
First Aid Care for all wounds first before applying a splint or sling. If bone is visible in the injured site, call your local emergency number (such as 911) or local hospital for further advice. HOW TO MAKE A SLING You'll need a piece of cloth that is about 5 feet wide at the base and at least 3 feet long on the sides. (If the sling is for a child, you can use a smaller size.) Cut a triangle out of a piece of this cloth. If you don't have scissors handy, fold a large square piece of cloth diagonally in...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 30
|
| 175. |
First Aid The following steps are based on instructions from the American Heart Association. Check for responsiveness. Shake or tap the person gently. See if the person moves or makes a noise. Shout, "Are you OK?" Call 911 if there is no response. Shout for help and send someone to call 911. If you are alone, call 911 and retrieve an AED (if available), even if you have to leave the person. Carefully place the person on their back. If there is a chance the person has a spinal injury, two people should m...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 28
|
| 176. |
First Aid The following steps are based on instructions from the American Heart Association. Check for responsiveness. Shake or tap the child gently. See if the child moves or makes a noise. Shout, "Are you OK?" If there is no response, shout for help. Send someone to call 911 and retrieve an AED (if available). Do not leave the child alone to call 911 and retrieve an AED until you have performed CPR for about 2 minutes. Carefully place the child on his or her back. If there is a chance the child has a ...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 25
|
| 177. |
First Aid The following steps are based on instructions from the American Heart Association. Check for responsiveness. Shake or tap the infant gently. See if the infant moves or makes a noise. Shout, "Are you OK?" If there is no response, shout for help. Send someone to call 911. Do not leave the infant yourself to call 911 until you have performed CPR for about 2 minutes. Carefully place the infant on their back. If there is a chance the infant has a spinal injury, two people should move the infant to ...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 25
|
| 178. |
First Aid Check the person's airway and breathing. If necessary, call 911 and begin rescue breathing, CPR , or bleeding control . Keep the person still and calm. Examine the person closely for other injuries. In most cases, if medical help responds quickly, allow the medical personnel to take further action. If the skin is broken, it should be treated immediately to prevent infection. Don't breathe on the wound or probe it. If possible, lightly rinse the wound to remove visible dirt or other contaminati...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 25
|
| 179. |
Preexisting Health Issues Add to Problems for Disaster Survivors THURSDAY, Aug. 26 (HealthDay News) -- Natural and man-made disasters are difficult for any person to endure, but researchers point out that these situations are particularly tough on people with disabilities and mental disorders. Their research is published in a series of articles in a special section of the journal Rehabilitation Psychology that focuses on disaster management for people with disabilities. "Katrina taught us a harsh lesson...
- Category: Unknown
- Publish Date: 8/27/2010
- Relevance: 37
|
| 180. |
Low VOC Foam-Bonding Adhesive Tapes for Woodbridge BioFoam ®
- Category: Press Releases - NEW
- Publish Date: 7/25/2010
- Relevance: 213
|
| 181. |
Product Description: An extremely agressive synthetic rubber based adhesive system double coated to a 1/2 mil polyester film. Product Use: This product is designed to adhere to difficult to bond (cured & uncured) rubber surfaces. A heavy masss of adhesive exhibits high peel strength, high tack and high shear strength. This allows 4787M product to adhere to a broad spectrum of surfaces. Especially suitable for extrusion applications in bonding to numerous elastomeric materials inc...
- Category: Products Search - NEW
- Publish Date: 7/19/2010
- Relevance: 144
|
| 182. |
- Category: Articles - NEW
- Publish Date: 10/13/2009
- Relevance: 160
|
| 183. |
- Category: Press Releases - NEW
- Publish Date: 9/27/2009
- Relevance: 160
|
| 184. |
- Category: Press Releases - NEW
- Publish Date: 8/4/2009
- Relevance: 27
|
| 185. |
Adchem Corporation, a leader in the foam fabrication market for more than 40 years, has released its new Low VOC family of automotive interior adhesive tapes at the Ward's Automotive Interiors Conference in Dearborn, MI.
- Category: Press Releases - NEW
- Publish Date: 6/14/2009
- Relevance: 80
|
| 186. |
Product Description: A 5 mil unsupported permanent acrylic pressure sensitive film cast on a silicone release liner. Ultra-violet has little or no effect on this film adhesive. Initial tack is low enough to permit some repositionability. This product exhibits high ultimate bond. Product Use: GENERAL USE: Applications were a high coat weight of an acrylic adhesive is needed for bonding metal and plastic nameplates as well as for joining dissimilar materials where long aging, UV and environmental resistan...
- Category: Products Search - NEW
- Publish Date: 2/8/2009
- Relevance: 9
|
| 187. |
Product Description: A plasticizer tolerant 3-mil transfer tape on a 2-mil clear polyester film liner. Product Use: Bonding to plasticizer containing material including PVC, vinyl products used in flooring, wall coverings, synthetic leather, banner stock and sheet or roll goods.
- Category: Products Search - NEW
- Publish Date: 10/7/2008
- Relevance: 10
|
| 188. |
- Category: Press Releases - NEW
- Publish Date: 9/23/2008
- Relevance: 152
|
| 189. |
High performance adhesive transfer tapes for bonding to foams used in sound attenuation and Vibration Damping Market.
- Category: Press Releases - NEW
- Publish Date: 9/22/2008
- Relevance: 304
|
| 190. |
Featuring a high performance adhesive transfer tape for bonding to TPO's and other low surface energy materials such as powder-coated metals and polypropylene, 7854 also demonstrates an excellent bond to ether, ester, and low perm urethane foams as well as PVC foams.
- Category: Press Releases - NEW
- Publish Date: 9/22/2008
- Relevance: 187
|
| 191. |
- Category: Press Releases - NEW
- Publish Date: 9/8/2008
- Relevance: 251
|
| 192. |
- Category: Media
- Publish Date: 5/14/2008
- Relevance: 160
|
| 193. |
- Category: Media
- Publish Date: 5/14/2008
- Relevance: 160
|
| 194. |
- Category: Media
- Publish Date: 5/14/2008
- Relevance: 160
|
| 195. |
- Category: Media
- Publish Date: 5/14/2008
- Relevance: 53
|
| 196. |
- Category: Media
- Publish Date: 5/14/2008
- Relevance: 53
|
| 197. |
Muntin Tape Brochure
- Category: Brochures - NEW
- Publish Date: 4/24/2008
- Relevance: 392
|
| 198. |
- Category: Unknown
- Publish Date: 4/15/2008
- Relevance: 8
|
| 199. |
The new LSE SDL (Low Surface Energy Simulated Divided Light) tape system was developed specifically for Kynar ® 500 flouropolymer, Vitrasil ® acrylic polyester and powder coated finishes. It provides long-term indoor and outdoor adhesion to a variety of window substrates, including easy-to-clean and self cleaning glass. The system also bonds to cellular PVC, vinyl, primed and unprimed wood, plastic, and painted aluminum muntin bars.
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 392
|
| 200. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 304
|
| 201. |
A broad range of Adchem tape products have been tested with the SABIC Innovative Plastic's Noryl* Resin family, including both rubber and acrylic adhesive chemistries, and have demonstrated numerous options for mounting and foam bonding tapes depending on the performance requirements and the other bonded substrate.
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 272
|
| 202. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 208
|
| 203. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 196
|
| 204. |
3175M & 5944M double-coated tape systems provide foam tearing bonds to 90% of tested urethanes, neoprene, and polyethylene foams, as well as excellent bond strength to most corks and rubber materials.
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 169
|
| 205. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 169
|
| 206. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 93
|
| 207. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 48
|
| 208. |
Adchem has completed its annual automotive certification testing. Using the A2LA accredited facility, Adchem has tested and re-certified numerous double-coated, transfer tape, and foam tape products to specifications from several OEM and Tier One Automotive Suppliers.
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 41
|
| 209. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 36
|
| 210. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 32
|
| 211. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 32
|
| 212. |
Part of the 250 family, 254M and 256M are a high-tack, moderate dead load acrylic adhesive film coated on both sides of a high quality polyester film, offering superior adhesion to a wide variety of Substrates.
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 27
|
| 213. |
Part of Adchem's new 300 Adhesive System, 353M is formaldehyde-free and combines the quick-stick properties of rubber-based systems with the temperature performance of acrylic systems.
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 27
|
| 214. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 19
|
| 215. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 16
|
| 216. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 16
|
| 217. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 16
|
| 218. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 16
|
| 219. |
8311M-74 brings a clean, permanent/removable bond to digital imaging, electronics, medical devices and graphic arts industries for temporarily mounting foams, polycarbonates, plastics to glass and other hard surfaces.
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 13
|
| 220. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 13
|
| 221. |
- Category: Press Releases - NEW
- Publish Date: 4/14/2008
- Relevance: 13
|
| 222. |
Product Description: A 1/16" thick black, 4 lb. density cross linked polyethylene foam coated on both sides with a high performance acrylic adhesive system developed specifically for extreme environmental exposures that does not require silane/isopropanol pre-treatment for adhesion to glass or ceramic surfaces. Product Use: Provide for long-term indoor and outdoor bonding of glass, ceramics, primed, painted, aluminum and plastic surfaces without silane/isopropanol pre- wash. The double-coated tape was e...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 182
|
| 223. |
Product Description: A 1/32" thick light gray, 6 lb. density cross linked polyethylene foam coated on both sides with a high performance acrylic adhesive system developed specifically for extreme environmental exposures that does not require silane/isopropanol pre-treatment for adhesion to glass or ceramic surfaces. Product Use: Provide for long-term indoor and outdoor bonding of glass, ceramics, primed, painted, aluminum and plastic surfaces without Silane/Isopropanol pre- wash. The double-coated tape ...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 177
|
| 224. |
Product Description: A 3-mil unsupported rubber based adhesive system coated to a polycoated release liner. Product Use: 6403-12pt-54 is a high performance rubber based transfer adhesive exhibiting high peel strength, excellent initial tack and shear strength. It has excellent bonding characteristics to a wide variety of substrates. GENERAL USE: This product is designed for general purpose bonding especially to foam materials and other low energy surface substrates.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 170
|
| 225. |
Product Description: A 1/16" thick black, 4 lb. density cross linked polyethylene foam coated on both sides with a high performance acrylic adhesive system developed specifically for extreme environmental exposures that does not require silane/isopropanol pre-treatment for adhesion to glass or ceramic surfaces. Product Use: Provide for long-term indoor and outdoor bonding of glass, ceramics, primed, painted, aluminum and plastic surfaces without silane/isopropanol pre- wash. The double-coated tape was e...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 160
|
| 226. |
Product Description: A 1/32" thick black, 6 lb. density cross linked polyethylene foam coated on both sides with a high performance acrylic adhesive system developed specifically for extreme environmental exposures that does not require silane/isopropanol pre-treatment for adhesion to glass or ceramic surfaces. Product Use: Provide for long-term indoor and outdoor bonding of glass, ceramics, primed, painted, aluminum and plastic surfaces without silane/isopropanol pre- wash. The double-coated tape was e...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 160
|
| 227. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays, signs, posters, mirrors, nameplates, and decorative wall products. Especially suited for splicing various types of paper products. Applications where r...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 160
|
| 228. |
Product Description: A 1/32" thick Light Grey, 6 lb. density cross linked polyethylene foam coated on both sides with a high performance acrylic adhesive system developed specifically for extreme environmental exposures that does not require silane/isopropanol pre-treatment for adhesion to glass or ceramic surfaces. Product Use: Provide for long-term indoor and outdoor bonding of glass, ceramics, primed, painted, aluminum and plastic surfaces without silane/isopropanol pre- wash. The double-coated tape ...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 160
|
| 229. |
Product Description: 0.5 mil polyester film, double coated aggressive rubber 1.4 mils exposed side and 1.3 mils liner side on a 60 lb. polycoated, lay-flat release liner. Product Use: 3175M is designed to incorporate the following features: The exposed side adhesive is a new, general purpose rubber based adhesive designed for bonding to a wide variety of polyurethane and polyethylene foams, felt, rubber, sponge, cork, abrasive materials and gasket materials. The liner side adhesive is a new, general-pur...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 160
|
| 230. |
Product Description: A heavy mass 3.5 mils of high tack, modified acrylic adhesive coated on both sides of 1 1/2 mil polyester film. Exhibits excellent adhesion to vinyl and painted metal surfaces along with good adhesion to sponge rubbers. Product Use: Applications where heavy adhesive mass and high total thickness is required. Has good resistance to plasticized vinyl extrusions.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 160
|
| 231. |
Product Description: A 3-mil high initial tack, unsupported acrylic permanent pressure sensitive adhesive film, cast on a silicone release liner. Bonds well to a variety of substrates at room temperature. Adheres well to many different types of foam materials. Product Use: For bonding to foams for use in sound dampening. For use in screen print and nameplate applications.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 153
|
| 232. |
Product Description: A 2 mil high-tack, unsupported acrylic, permanent pressure sensitive Adhesive film cast on a silicone release carrier. Has a broad range of bonding to a variety of substrates at room temperature. Adheres well to many different types of foam materials. Product Use: Bonds well to variety of substrates. For bonding to foams for use in sound dampening. For use in screen print and nameplate applications.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 153
|
| 233. |
Product Description: A 3-mil high initial tack, unsupported acrylic permanent pressure sensitive adhesive film, cast on a silicone release liner. Bonds well to a variety of substrates at room temperature. Adheres well to many different types of foam materials. Product Use: ForAutomotive Heat shield applications.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 153
|
| 234. |
Product Description: A 1/16" thick White cross-linked closed-cell polyethylene foam coated on both sides with a high performance acrylic adhesive system on the liner side for bonding to glass and other hard to bond to materials with an aggressive rubber based adhesive system on the exposed side for immediate bonding to vinyls, fiberglass and plastics. Product Use: Used in fenestration applications to seal window glass into wood, aluminum or plastic frames, also for use in mount...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 150
|
| 235. |
Product Description: A 1/16" thick black cross-linked closed-cell polyethylene foam coated on both sides with a high performance acrylic adhesive system on the liner side for bonding to glass and other hard to bond to materials with an aggressive rubber based adhesive system on the exposed side for immediate bonding to vinyls, fiberglass and plastics. Product Use: Used in fenestration applications to seal window glass into wood, aluminum or plastic frames, also for use in mounting o...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 150
|
| 236. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays, signs, posters, mirrors, nameplates, and decorative wall products. Especially suited for splicing various types of paper products. Applications where r...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 237. |
Product Description: A high-peel, high-tack, moderate dead load acrylic adhesive film coated on both sides of a high quality polyester film. Product Use: 353M exhibits excellent adhesion to a very wide variety of substrates. 353M also has good general purpose foam lamination, as well as good general purpose lamination to fabricated parts. General Use: For bonding and laminating to a wide variety of urethane foams including polyether, polyester and low perm foams. For bonding and laminating to a wide var...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 238. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 254M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 239. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 254M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 240. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: This product exhibits all the positive results associated with a high quality, general purpose acrylic system with exceptionally high peel and shear properties and high initial tack. 9254M has excellent resistance to high temperatures, steam autoclaving, sterilization by gamma ray, E.O., chemical plasma or chemical vapor. Adhesion is excellent to a wide ...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 241. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: This product exhibits all the positive results associated with a high quality, general purpose acrylic system with exceptionally high peel and shear properties and high initial tack. 9256M has excellent resistance to high temperatures, steam autoclaving, sterilization by gamma ray...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 242. |
Product Description: A high-peel, high-tack, moderate dead load acrylic adhesive film coated on both sides of a high quality polyester film. Product Use: 353M exhibits excellent adhesion to a very wide variety of substrates. 353M also has good general purpose foam lamination, as well as good general purpose lamination to fabricated parts. 353M is ROHS compliant. General Use: For bonding and laminating to a wide variety of urethane foams including polyether, polyester and low perm foams. For bonding and ...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 243. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: This product exhibits all the positive results associated with a high quality, general purpose acrylic system with exceptionally high peel and shear properties and high initial tack. 9254M has excellent resistance to high temperatures, steam autoclaving, sterilization by gamma ray, E.O., chemical plasma or chemical vapor. Adhesion is excellent to a wide ...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 244. |
Product Description: A 1/2 mil polyester film coated on both sides with a 2.3 mil mass of an aggressive high quality synthetic rubber base adhesive. Product Use: Applications where high peel, high shear, high tack, and a very good heat resistance is required using a high adhesive mass. GENERAL USE: For use in areas where exceptional shear properties are required. Excellent peel and shear characteristics. Die cuts cleanly.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 245. |
Product Description: A 3/32" thick White cross-linked closed-cell polyethylene foam coated on both sides with a high performance acrylic adhesive system on the liner side for bonding to glass and other hard to bond to materials with an aggressive rubber based adhesive system on the exposed side for immediate bonding to vinyls, fiberglass and plastics. Product Use: Used in fenestration applications to seal window glass into wood, aluminum or plastic frames, also for use in mounting o...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 246. |
Product Description: A high tack, moderate dead load acrylic adhesive film coated 1.3 mils on both sides of a high quality polyester film. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays. 254M has excellent resistance to oils, some plasticizers, ultraviolet light and withstands higher temperatures than rubber based adhesive systems. Adhesion is excellent to a very wide variety of substrates.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 247. |
Product Description: A high-tack, moderate dead load acrylic adhesive coated 2 mils on both sides of a high quality polyester film. Adhesion is excellent to many surfaces. Exhibits excellent balance of properties. Product Use: For bonding and laminating to a wide variety of cloths, vinyls, corks, paper, rigid and flexible plastics. For mounting displays, signs, posters, mirrors, nameplates, and decorative wall products. Especially suited for splicing various types of paper products. Applications where r...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 248. |
Product Description: A high tack, moderate dead load heavy 2 mil coating of an acrylic adhesive coated on both sides of a high quality polyester film. Resistant to high temperature and U.V. exposure. Resistant to some plasticizers. Product Use: This product exhibits all the positive results associated with a high quality, general purpose acrylic system with exceptionally high peel and shear properties and high initial tack. 9256M has excellent resistance to high temperatures, steam autoclaving, steriliz...
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 144
|
| 249. |
Product Description: 1/16" thick, 4 lb. density white cross-linked polyethylene foam coated on both sides with a high performance acrylic adhesive system. Product Use: Used to seal window glass into wood, aluminum or plastic frames. The foam serves to seal against air, moisture, light and dust penetration. Foam is also used to fill any irregularities in the frame and functionally provide cushioning, vibration and shock damping, insulate in thermal and sound deadening applications.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 128
|
| 250. |
Product Description: 1/32" thick, 6 lb. density black cross-linked polyethylene foam coated on both sides with a high performance acrylic adhesive system. Product Use: Used to seal window glass into wood, aluminum or plastic frames. The foam serves to seal against air, moisture, light and dust penetration. Foam is also used to fill any irregularities in the frame and functionally provide cushioning, vibration and shock damping, insulate in thermal and sound deadening applications.
- Category: Products Search - NEW
- Publish Date: 3/16/2008
- Relevance: 128
|