Product Description:
The exposed or print side of the 1/2-mil polyester is coated with 1-mil of a high gloss, high tack, moderate peel, moderate shear acrylic adhesive. The liner or glass side is coated with 1-mil of a low peel, removable acrylic based adhesive.
Product Use:
Used in the digital imaging and graphic arts industry for permanently bonding to the print while providing an adequate, though removable bond on glass. This allows for clean, easy removability even after 3 months exposure to direct sunlight. GENERAL USE: For mounting of digitally imaged prints on glass where clean, easy removability is required, even after 3 months exposure to direct sunlight. The 74-lb. Polycoated liner assures flatness of the printed image after laminating and resists cockling.
Adhesive Family
8300 Removable Tape System
Release Liner
74# White Polycoated Kraft
Carrier/Backing
1/2 mil Polyester Film
Tape Construction
Differential Double Coated PET Film Tape
Adhesive Liner Side
Removable Acrylic
Adhesive Thickness - Liner Side (Mils)
0.9
Adhesive Exposed Side
Permanent Acrylic
Adhesive Thickness - Exposed Side (Mils)
1.1
Peel Exposed Side
40
Oz/Inch
Peel Liner Side
30
Oz/Inch
Shear Exposed Side
7
days
Service Temperature
°F to
°F
Note: Data is based on limited testing and under no load.
Roll Weight
Note: Theoretical number only. The actual roll weight may vary.
Tape Thickness (without release liner)
Note: Theoretical number only. Does not include Release Liner. The actual Tape thickness may vary.
SDS Note: If the specific product is not listed in the appendix of the provided "Article Exemption Letter", please contact your sales/account representative for a SDS.